DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Framing and Foundation > Subfloor not flush with rim joist





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 08-31-2010, 10:58 AM  
kwerk
Junior Member
 
Join Date: Aug 2010
Location: KC
Posts: 8
Default Subfloor not flush with rim joist

I have removed my old deck and opened the bottom of the wall because of some water damage to the rim joist. House is 25 years old.

I noticed the subfloor does not go all way the under the sole plate of the wall to be flush with the rim joist. It is 1" short. Is this something to worry about? It is a two story wall.

Also what are these nests?? The wood fragments are from holes drilled for electrical I believe. There does not appear to be any insect damage to the wood. I think the 8 million spider nests along the sill plate joist took care of that for me. The wall was covered with foam board sheathing. There is also a preventative termite perimeter done by a previous owner.




Short about 1":



__________________
kwerk is offline  
 
Reply With Quote Quick reply to this message
Old 08-31-2010, 03:55 PM  
Cork-Guy
Cork Flooring Pros
 
Cork-Guy's Avatar
 
Join Date: Oct 2009
Posts: 243
Default

Those actually appear to be mud wasp nests and not spider nests from the picture you showed up top.



__________________

[B][URL="http://www.corkflooringpros.com"]Cork Flooring[/URL][/B] - [B][URL="http://www.ventless-fireplace.org"]Ventless Fireplace[/URL][/B]

Cork-Guy is offline  
 
Reply With Quote Quick reply to this message
Old 09-09-2010, 09:04 AM  
kwerk
Junior Member
 
Join Date: Aug 2010
Location: KC
Posts: 8
Default

The spider nests were underneath all along the sill plate.

Is it going to cause a problem attaching a deck ledger to the rim joist? because it looks like the bottom plate of the wall is not nailed through the rim joist.

__________________
kwerk is offline  
 
Reply With Quote Quick reply to this message
Old 11-29-2010, 05:22 PM  
nealtw
Senior Member
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 7,741
Liked 542 Times on 491 Posts
Likes Given: 1000

Default

Tthe plywood is not a problem clean out the mud wasps and cover with tar paper before you lag your new deck on

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 03-23-2011, 01:34 PM  
cline
Junior Member
 
Join Date: Mar 2011
Location: DC, DC
Posts: 10
Default

mine was actually more far short than this. like about 2" and we still made it work. just get it even..

__________________
cline is offline  
 
Reply With Quote Quick reply to this message
Old 03-27-2011, 08:19 AM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,359
Liked 36 Times on 31 Posts
Likes Given: 2

Default

I refuse to build a deck attached to any house except a second story one. I make all mine free standing. That way there's 0 chance of wall damage.
If you insist on doing yours that way then there needs to be OSB sheathing running past the top of the foundation, then covered with Storm and Ice shield over that, not just tar paper. Attach 12" long pieces of vinyl lumber every 4' along the new ledger board to act as a spacer and through bolt or at least use long lag bolts through the ledger and spacer into the bottom mud sill (also know as the foundation plate. Then water water can run down the wall and not lay on top of the decks ledger board.

Never have the decking material come in direct contact with the siding.
Never have the siding making full contact with the decking.
Never have the deck any higher the 4" min. below any door openings or it will take out the subflooring.



__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Our well pump turns on and off several times when we flush the toilet/ sleepyhead Plumbing Forum 7 03-24-2012 11:57 AM
HELP - toilet flush makes noises like jackhammer jennebelle Plumbing Forum 29 05-26-2010 07:34 PM
Toilet does not flush Zachary Plumbing Forum 13 08-19-2009 12:51 AM
How flush should pre-hung doors be? TaskBoy Windows and Doors 1 12-14-2008 06:06 AM