DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   Framing and Foundation (http://www.houserepairtalk.com/f32/)
-   -   Tray ceiling (http://www.houserepairtalk.com/f32/tray-ceiling-13734/)

ratherhandy 04-06-2012 12:06 PM

Tray ceiling
 
Would love to put a tray ceiling in my dining room but I am not sure on how to frame it. I want to put a square within a square tray ceiling not the one that's just perimeter recessed if this makes sense. If you have any idea how to help me or need more info please reply. Thank you in advance

nealtw 04-06-2012 01:21 PM

Meny people just build a shot wall and attach that to the ceiling and run a 2x4 along the wall. A few blocks between the wall and the the 2x4 to keep it straight. We found that often the ceiling joists are up and down and this is transferred to the box below so now we attach a 2x4 to the ceiling and come down with a peice of plywood or osb and attach a lower 2x4 to that on the inside and you can put that in level and level across to put a 2x4 on the wall and then the few blocks to keep it straight. For a double we just start with a 12" drop and than do it again with a 6" drop.
Keep in mind, if this area has not been drywalled yet, you do want to stop loose insulation from entering this cavity with poly or something and the wall should be firestopped. Any fire in the wall wants to be stopped from entering this drop. You could drywall first, or solid block between the studs in the wall or put plywood between the wall and your box.
I hope this helps

ratherhandy 04-07-2012 01:39 PM

Quote:

Originally Posted by nealtw
Meny people just build a shot wall and attach that to the ceiling and run a 2x4 along the wall. A few blocks between the wall and the the 2x4 to keep it straight. We found that often the ceiling joists are up and down and this is transferred to the box below so now we attach a 2x4 to the ceiling and come down with a peice of plywood or osb and attach a lower 2x4 to that on the inside and you can put that in level and level across to put a 2x4 on the wall and then the few blocks to keep it straight. For a double we just start with a 12" drop and than do it again with a 6" drop.
Keep in mind, if this area has not been drywalled yet, you do want to stop loose insulation from entering this cavity with poly or something and the wall should be firestopped. Any fire in the wall wants to be stopped from entering this drop. You could drywall first, or solid block between the studs in the wall or put plywood between the wall and your box.
I hope this helps

Thanks a lot it does


All times are GMT -6. The time now is 06:34 PM.