DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Framing and Foundation > weight bearing beam compromised




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 07-24-2011, 08:06 AM  
jzw
Junior Member
 
Join Date: Jul 2011
Location: Livingston, NJ
Posts: 1
Default weight bearing beam compromised

hi there, i am having a serious issue now... i bought a 82 year old tudor house, beautiful home with very sound structure. i had several contractors in yesterday to install recessed lights in the living room as it is a bit dark and my kids are scared of that room. they tried to fish a wire down to the basement of which the ceiling is all covered by plaster. They broke a small area (3*3) on the basement celing to exposed wood and started drilling upwards thru what they thought was subfloor. They used a at least foot long drill bit. Drilled 4 holes, couldn't get thru. Went upstairs, started drilling downward from inside of a wall cavitity and again after 3 or 4 holes, the drill bit didn't show up on the other side even though it was totally in the wood. They told me that the wood piece was too thick and was looking for even longer bit. i said wait and went down stairs and from another session of the basement where i can see the framing a bit, i found out these are 2*10 or 2*16s (two together) and weight bearing as other joists are attached to it 1 foot apart when this beam is at least 5 ft apart from another weight bearing beam. Now I am really scared. Apparently 7 or 8 holes have been drilled on it in a small area and i'd imagine they totally destroyed the integrity of this beam. Right now, it don't see any issue yet. But i am afraid that it might give after we move in with heavy furniture. My question is:

1. what can i do to fix it (adding another piece of 2*10 or 2*16 next to the two and nail them together)? it is pretty hard as the ceiling is all plastered.
2. is there any kind of reparing thing I can inject into the holes from those i can see in the basement ceiling (the wall upstairs is already patched) and then hardes into a strong structure that would fill the holes and also provide structural support.
2. how do i deal with the contractors. they insisted it would not cause any damages. can i sue them?



__________________
jzw is offline  
 
Reply With Quote Quick reply to this message
Old 07-24-2011, 03:44 PM  
inspectorD
Housebroken
HRT_MODERATOR.png
 
inspectorD's Avatar
 
Join Date: Dec 2005
Location: Litchfield, CT
Posts: 4,075
Liked 124 Times on 104 Posts
Likes Given: 302

Default Well

About the only thing you can do right now, is stop the drilling, and call an engineer.They are the only ones qualified to give you a real answer. Anyone here is just guessing.
Good luck, and welcome to the world of "What contractors deal with". Unfortunatly.

__________________

Just My
Made in the

inspectorD is offline  
 
Reply With Quote Quick reply to this message
Old 07-24-2011, 09:00 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,277
Liked 850 Times on 759 Posts
Likes Given: 1466

Default

You may as well open the ceiling a little the engineer will want to see the damage, no short cuts here.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Removing bearing wall and putting up a beam sardinia Framing and Foundation 2 12-23-2011 12:59 PM
Additional weight on Truss reprosser Framing and Foundation 5 05-07-2010 05:16 AM
Attic decking? Weight concerns rt4me Roofing and Siding 0 12-13-2008 09:25 PM
Deck attic? Weight concerns rt4me Roofing and Siding 0 12-13-2008 02:38 PM
How much weight will a 4x4 douglas fir post hold? harleysilo Framing and Foundation 1 02-15-2007 01:34 PM