50 year old faucet removal
 

retainer screw removed ,tried everything to remove these old handles ,heat clr etc. no luck any ideas,not sure if you pull or unsrew them. fausets are probly 50 years old, would replace them but until i remove front hardware wont be able to remove devirter. dont wont to remove tile
thanksAttachment 2960

Hmmm I am not sure about this one, hopefully someone will give you a hand, there is a guy on here that seems to know a lot about plumbing.

So do you have access to the backside of the wall so you can get to the diverters? You mentioned not wanting to take off tile.

Good luck,

-Ryan

Use a Faucet Handle Puller...

http://www.houserepairtalk.com/attac...1&d=1312610509

thanx
just an update handle puller no good no set screw in on handle... finally got them off with lots of degreaser and a hammer was pretty much welded on from the years of use..parts are shot but trying to find new parts nit sure if i can find replacement cartrige
Attachment 2962

Here are a couple of good possibilities if you can't find anything local...

Alfano Replacement Plumbing Parts

New York Replacement Parts