DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Plumbing Forum > How to clear a slow laundry tub drain




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 08-03-2010, 11:35 AM  
AlexGB
Junior Member
 
Join Date: Mar 2007
Posts: 6
Default How to clear a slow laundry tub drain

I did a search for "slow drains" but didn't find anything specific to laundry tubs (or trays).

Mine has slowed to the point that the output of the washer is filling the thing almost to the point of overflowing. It then takes hours for the water to drain out of the tubs. (This is a dual tub, so what the washer dumps into the left side backs up into the right one, filling it also).

I've tried using a plunger alone, then I tried the baking soda plus vinegar method that worked so well for my bathroom sink. No dice. I don't want to use anything caustic like Drano or Liquid Plumber because (a) some of the plumbing is plastic and (b) the other parts are pretty old. And the tub drains are small...only about an inch and a quarter in diameter, so I don't see how I could get a snake down there.

Before I call the plumber, any suggestions?

P.S. Yes, I know, I should have some kind of strainer or filter over the washer hose to prevent the lint from plugging up the drain.



__________________
AlexGB is offline  
 
Reply With Quote Quick reply to this message
Old 08-03-2010, 01:30 PM  
inspectorD
Housebroken
HRT_MODERATOR.png
 
inspectorD's Avatar
 
Join Date: Dec 2005
Location: Litchfield, CT
Posts: 3,974
Liked 98 Times on 84 Posts
Likes Given: 218

Default well

This could be a main drain issue, a trap under the sink bowl issue, or even a galvanized line that will never get unclogged issue. Purchase a snake and see what that does.

My advice...get the plumber, sometimes it is better to let someone else cause the bigger problem and fix it right.



__________________

Just My
Made in the

inspectorD is offline  
 
Reply With Quote Quick reply to this message
Old 08-03-2010, 02:14 PM  
mudmixer
Contractor
 
mudmixer's Avatar
 
Join Date: Sep 2006
Posts: 585
Liked 41 Times on 34 Posts
Likes Given: 36

Default

It will take something to dislodge any obstruction.

Forget about the typical "uncloggers" because they are made for organic break-up and not synthetic or cotton lint.

A sanke or a wrench to loosen things is a good strat.

You can also check to see if the vent line is not plugged by debris, insect nests, dead birds or whatever.

Dick

__________________

Last edited by mudmixer; 08-03-2010 at 02:14 PM. Reason: addition
mudmixer is offline  
 
Reply With Quote Quick reply to this message
Old 08-03-2010, 05:21 PM  
Redwood
Certified Lunatic
 
Redwood's Avatar
 
Join Date: Apr 2009
Location: Olde Tyme, Connecticut
Posts: 887
Default

I'm going to side with Inspector D on this one...

Call in a plumber and get results!

With snaking drains you can snake all day in the wrong spot and nothing will happen... Having been in the business I can tell you with all honesty that new guys going out there and starting take about a full year before they become proficient at cleaning drains. I've even seen experienced plumbers that didn't have drain cleaning experience struggle...

I've also seen the expense and effort homeowner handymen put forth without results...

If you are indeed tangling with a clogged main we are also talking serious equipment being used that can inflict serious or, even deadly injuries in a split second.

Leave it to the pro's and they will get you running again.

As for a clogged vent...
The purpose of the vent is to protect the water seal of the trap.
There are a very few times when a clogged vent will cause a drain to be slow.
Most of them when there are underlying problems with a clogged drain needing air displaced to allow more water into the drain pipe.

__________________
Redwood is offline  
 
Reply With Quote Quick reply to this message
Old 08-04-2010, 05:10 PM  
diyguy427
Junior Member
 
Join Date: Jul 2010
Posts: 1
Default

I read through your post and the responses. The size of the drain may be part of the problem. If you decide to hire someone, I would strongly encourage you to check them out first. Too many horror stories about contractors, etc. doing sub-standard work and/or shortcuts that can make the situation even worse.

___________________________
DIY...again! | Plumbing Help

__________________
diyguy427 is offline  
 
Reply With Quote Quick reply to this message
Old 08-04-2010, 09:37 PM  
GregC
Quick Belt System
 
Join Date: Jan 2010
Posts: 82
Default

Hello, Yes...clogged laundry tub. Have seen and cleaned hundreds of them! If you have a removable trap under the LT, then remove it, and clean it out. It will be full of washer lint. Quick fix for the washer drain hose... best and cheapest thing, a womans pair of nylons (pantyhose) Only need one side of the leg. LOL Attach them to the end of the discharge hose it will catch 99% or the laundry lint, allowing water to flow without a problem. Cheap and easy, thats if you dont have to buy the pantyhose. Hope this helps.



__________________

GregC, President/Founder [COLOR="Blue"]www.Quicktoolbeltsystem.com[/COLOR]

GregC is offline  
 
Reply With Quote Quick reply to this message
Reply


Tags
drains, clogs, laundry tub

Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Can't clear galvanized pipe drain. Replace? DaringDamsel Plumbing Forum 6 07-08-2009 09:01 AM
Clear finish for wood? TaskBoy Carpentry and Woodworking 7 06-09-2009 08:26 PM
Really slow drain homefish Plumbing Forum 5 05-18-2009 08:05 AM
Slow Drain Tub rdonovan1 Plumbing Forum 9 10-29-2008 09:06 PM