DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Plumbing Forum > low flow faucet





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 01-31-2006, 10:21 AM  
ENordin
Junior Member
 
ENordin's Avatar
 
Join Date: Jan 2006
Posts: 3
Send a message via Yahoo to ENordin
Default low flow faucet

the kitchen sink faucet (single handle), when turned to the hot side, has a very, very low flow of water. I checked the valve handle and it is fully open.
The faucet, I would guess, is about 7 or 8 years old. Do I need to replace the inner stem or is it something else?



__________________
ENordin is offline  
 
Reply With Quote Quick reply to this message
Old 01-31-2006, 10:43 PM  
pqglen
Member
 
Join Date: Dec 2005
Posts: 37
Default

I am guesiing that this is the only fixture that has low flow. I would first check to see if the supply line on the hot side is kinked. If it isfine then I would check the faucet cartridge (whaT you are calling the stem) for debris. I



__________________
pqglen is offline  
 
Reply With Quote Quick reply to this message
Old 01-31-2006, 10:46 PM  
HandyMac
Mac
 
Join Date: Nov 2005
Posts: 29
Default

If there is a flexible supply hose connected to the faucet for the hot water, check it for interior swelling. A very simply way to do that is to switch the hot and cold hoses and see if the cold is then slow.

__________________
HandyMac is offline  
 
Reply With Quote Quick reply to this message
Old 02-01-2006, 04:19 PM  
Manuel Nunez
Junior Member
 
Join Date: Jan 2006
Posts: 13
Default

Shut off hot water valve and remove supply line. Slowly open valve to test for pressure, if not pressure, remove valve stem and see what you find wrong there. If pressurized, check supply line, blowing it to make sure is open. If line is open then you have to deal with the faucet.

__________________
Manuel Nunez is offline  
 
Reply With Quote Quick reply to this message
Old 02-01-2006, 07:15 PM  
ENordin
Junior Member
 
ENordin's Avatar
 
Join Date: Jan 2006
Posts: 3
Send a message via Yahoo to ENordin
Default

I tried your suggestions and found that the valve was the culprit. it turned freely and worked somewhat but when i removed it, there was a rubber stopper that had separated from the handle. I replaced the valve and all is flowing normal. thanks for your help everyone.



__________________
ENordin is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Bathtub faucet flow youthpastorsmom General Home Improvement Discussion 2 02-01-2009 04:50 PM
Faucet leak Ken H Plumbing Forum 4 08-26-2008 11:50 AM
Problem with vessel faucet CENTENNIAL General Home Improvement Discussion 1 09-10-2007 11:14 AM
Low water faucet flow TXDIYRookie Plumbing Forum 2 09-19-2006 01:44 AM
outside faucet catlutz Plumbing Forum 5 08-25-2006 09:51 AM