DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Plumbing Forum > No Hot Water then, Lukewarm water now.




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 12-27-2012, 11:31 AM  
Gonzowerke
Junior Member
 
Join Date: Dec 2012
Posts: 11
Default No Hot Water then, Lukewarm water now.

Hello All,

Here is my problem,

All of a sudden, the Wife complains of a cold shower, but if she jiggles the handle, it gets a little warm. It's a single handle model by American.
I thought maybe the problem was the electric water heater, but no, it pumps out perfectly heated water. I thought I would flush it anyway, just in case, and because I have been having a silt problem with my well, causing me to change filters more often. Not wanting to shut off water to the whole house, I just shut off the cold inlet supply to the heater and cracked the draincock to let it flow outside into my yard. After half an hour, I still had decent flow. That was when I realized that cold water was backflushing in from the hot outlet. Upon investigating, I can hear water rushing at the shower valve. I go out and buy a replacement cartridge, thinking that's the problem. This one doesn't have any fancy balls or ceramics, it's just the brass one with the holes and the angled groove around it. That improved the problem, to where showers are just about bearable. At the same time, I noticed my hot water at the kitchen runs hot, then cold, then lukewarm, then cold. My house has centralized plumbing, i.e. all the bathrooms and the kitchen are in the middle of the house so you don't get long plumbing runs. Even my well inlet comes up in the middle of the basement slab right in the center of things.
This handle is so old, the manufacturer's website doesn't have info on it, and they haven't deigned to answer my emails. Worse, I have no access to the valve itself. The shower side is a fiberglass shower enclosure, and the back side is in the main bathroom's linen closet, with no access panel. I know I need to just get in there and see what I got, I just wanted to see what others thought. I know newer handles have temperature mixing valves to prevent scalding, and I wonder if this one has that, and it has failed. I wonder if there are rebuild kits? Probably not, as you can't get just the valve, they want you to get EVERYTHING, valve, handle, showerhead, etc,etc,etc. I just can't think of any reason why water would be flowing from the cold to the hot side at this one valve. I posted this problem on justask.com, and was underwhelmed by the "plumber" who answered. He kept saying I had a broken dip tube in my heater, causing cold water to flow out before it was heated. After the first time he said that, I drained my heater, undid the inlet, and used a straightened coathanger to verify my tube was intact. It is. I even went so far as to remove the upper element and look inside with a flashlight to verify that, yes indeed, my tube was intact. He said it had to be my tube. When I asked how the tube would allow flow from the cold side at the valve, he ignored the question and reiterated his claim it was the tube.

Sorry for what turned into more of a rambling rant than anything else...


Chris



__________________
Gonzowerke is offline  
 
Reply With Quote Quick reply to this message
Old 12-27-2012, 12:55 PM  
nealtw
Senior Member
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,025
Liked 693 Times on 619 Posts
Likes Given: 1215

Default

You should not have had water going thru the valve when you drained the tank unless it was open so that would lead me to that being a problem. Assembled wrong or more parts that can be changed. Short of that I would be digging thru the linen closet.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
hot water heater - hot water venting outside from mixer valve montag Plumbing Forum 13 10-01-2012 03:21 PM
Can bath water or water from a washing machine be used to water the lawn? dylanalexander55 General Home Improvement Discussion 3 08-10-2012 06:32 AM
MUST I replace a hot water heater that got water damage from Hurricane Irene? Seidperson Plumbing Forum 2 09-12-2011 07:12 PM
Basement water leak due to a submersible sump pump failing in a water well stanigator Plumbing Forum 1 05-18-2009 05:27 PM
can I reuse hot/cold water flex lines on gas water heater? gordon Plumbing Forum 2 12-14-2008 12:16 PM