DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (
-   Plumbing Forum (
-   -   Pex and diverter valves (

Bails 08-22-2010 09:55 PM

Pex and diverter valves
Good day all new to the site and love what I`ve senn so far, does anyone know if you can use pex to connect direct to a shower/bath diverter valve or do I need to have copper around the valve and then connect to the Pex, any thoughts would be appreciated. Dave, Alberta Canada.

Redwood 08-29-2010 08:18 AM

You need to use copper or, ips to the tub spout with many mixers.
If you don't you may get water coming out of the shower when filling the tub.

All other lines may be pex including the shower riser.

serpentine5 10-31-2010 12:18 AM

are you asking about the connections from the hot and cold knobs to the diverter knob? or not having hot and cold knobs and goign directly to the diverter? you would get water (hot and cold both) coming out of the shower and tub constantly without any way of shutting it off. now if you plugged the shower or the tub out on the diverter you would be able to shut the water off, but you would not be able to change the temp of the water or pressure coming out, you would have full pressure and equal hot and cold mixing.
I am not sure why Redwood says you need to use copper or IPS with many diverters (mixers) or you will get water out of the shower when you only want it out of the tub. With pex you would connect to the spout out port on the mixer with a brass threaded fitting. how or why that would effect the working of the mixer.... I do not know. I have always used galvanized for the spout, and have never used copper. Maybe I am not fully understanding what is being said here....

Redwood 10-31-2010 08:44 AM

If the mixer goes to a diverter tub spout the smaller inside diameter of the pex tubing and its fitting will increase the back pressure and push water up to the showerhead causing it to drip.

serpentine5 10-31-2010 05:57 PM

LOL, makes perfect sense. Thanks for explaining that Redwood.

All times are GMT -6. The time now is 10:47 PM.