DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Plumbing Forum > Plumbing review




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 06-05-2014, 11:52 AM  
Jungle
Senior Member
 
Join Date: May 2013
Posts: 327
Liked 28 Times on 25 Posts
Likes Given: 31

Default

"The soil stack should continue up through the roof to ventilate to the atmosphere. "
It can go to the left about 4 feet then up on past the roof on the side?



__________________
Jungle is offline  
zannej Likes This 
Reply With Quote Quick reply to this message
Old 06-05-2014, 12:07 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,893
Liked 813 Times on 726 Posts
Likes Given: 1404

Default

That sounds like it would work, I would like to know what others think. If you could go back to the big pipe in the basement and maybe do away with the pipe outside.



__________________
nealtw is offline  
zannej Likes This 
Reply With Quote Quick reply to this message
Old 06-12-2014, 10:22 PM  
zannej
Senior Member
 
zannej's Avatar
 
Join Date: Jun 2014
Posts: 162
Liked 18 Times on 12 Posts
Likes Given: 342

Default

Hi. I'm new here but I saw this thread and had a few questions.
In the picture here:

Quote:
Is the pipe that is running horizontally off to the right the vent pipe? Or is that something else?
If it is a vent pipe, doesn't it need to travel vertically for at least 6 inches above the flood level of the highest fixture before moving horizontally?

For the washing machine drain, I found this diagram that has the proper measurement ranges. I can't tell if the one in the picture falls within those parameters.


For sanitary tees, I thought that they could not be installed horizontally-- or does that just mean that one of the sweeps has to be vertical? For some reason I thought it had to be setup so that the straight entry point was up.


That looks like the position of the sanitary tee in the first picture of the first post
Quote:
Or is that a wye? I still haven't quite learned to tell the fittings apart just yet.

I have the same situation with a vent that terminates under a soffit. I have one main vent stack and two auxiliary vents. One of the auxiliary vents routes under the soffit and then has elbows to bring it out from under and then go above the roof. For some reason the other one does not do that. I wonder if having the elbows meets code...

As for the AAV, they are not allowed in all states. Last I read, California was trying to ban them.

I hope you get the sewer gas smell resolved.
__________________

Last edited by zannej; 06-12-2014 at 10:27 PM.
zannej is offline  
 
Reply With Quote Quick reply to this message
Old 06-12-2014, 10:29 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,261
Liked 385 Times on 301 Posts
Likes Given: 157

Default

Good eye, Sannej, a straight San-T could be a problem. This looks like it performs like a Wye if you observe the fitting above the San-T. The preferred use is the vertical but field limitations cause all kinds of compromises ... I believe this is one of those situations.

__________________
CallMeVilla is offline  
zannej Likes This 
Reply With Quote Quick reply to this message
Old 06-12-2014, 10:55 PM  
zannej
Senior Member
 
zannej's Avatar
 
Join Date: Jun 2014
Posts: 162
Liked 18 Times on 12 Posts
Likes Given: 342

Default

I thought that the sanitary tee in that position is actually a code violation. I know the change of direction is a code violation.

So in addition to turning the fitting the other way, maybe they would need to replace it with a wye and bend or the sanitary combo fitting shown in the sketch above?

Also, do I see an electrical outlet (maybe GFCI) or junction box just dangling? LOL. I hope that is just temporary.

I've been studying the plumbing code. I think I'll have to take a crack at studying the electrical code once I feel I've gotten a decent grip on plumbing knowledge.

__________________
zannej is offline  
 
Reply With Quote Quick reply to this message
Old 06-13-2014, 12:01 AM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,893
Liked 813 Times on 726 Posts
Likes Given: 1404

Default

The more times you look at these pictures the more you think Jungle should just cut it out and start over. But the problem complained about was sewer gas leaking into the house, which could be the vent outside the kitchen. What it looks like to me is the outside vent is servicing the washing machine and there is no vent servicing the sink up stairs unless there is something we haven't seen yet. With out that vent it is easy to see why the sink trap would vacume out the water from the trap.

__________________
nealtw is offline  
zannej Likes This 
Reply With Quote Quick reply to this message
Old 06-13-2014, 04:21 AM  
zannej
Senior Member
 
zannej's Avatar
 
Join Date: Jun 2014
Posts: 162
Liked 18 Times on 12 Posts
Likes Given: 342

Default

Quote:
Originally Posted by nealtw View Post
The more times you look at these pictures the more you think Jungle should just cut it out and start over. But the problem complained about was sewer gas leaking into the house, which could be the vent outside the kitchen. What it looks like to me is the outside vent is servicing the washing machine and there is no vent servicing the sink up stairs unless there is something we haven't seen yet. With out that vent it is easy to see why the sink trap would vacume out the water from the trap.
Good point. I'm also wondering what the sort of louvered white thing on the left is in this picture:


Is that something that brings air in to the house? If so, then the sewer gas could be going in to it.

I wish I could find my photo of how one of my vents goes around the soffit... I think that is what needs to be done in this case-- making sure that it maintains the 1/4" per foot incline.
__________________
zannej is offline  
 
Reply With Quote Quick reply to this message
Old 06-13-2014, 08:24 AM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,893
Liked 813 Times on 726 Posts
Likes Given: 1404

Default

That wood be a range hood van and when the fan is not running....

__________________
nealtw is offline  
zannej Likes This 
Reply With Quote Quick reply to this message
Old 06-14-2014, 12:04 PM  
zannej
Senior Member
 
zannej's Avatar
 
Join Date: Jun 2014
Posts: 162
Liked 18 Times on 12 Posts
Likes Given: 342

Default

I'm also now noticing that the hole where the vent pipe comes out of the wall is rather large and doesn't look like its sealed up and it looks like it might have an ABS elbow, but I can't tell for sure. I wonder what the green thing coming out of the wall is.. Looks sort of like a garden hose. I think that mounted thing on the wall is to hold a hose...



__________________
zannej is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Venting Attic Oldmandan Roofing and Siding 21 09-21-2012 09:41 AM
Venting andersonalishia HVAC 1 08-17-2010 06:44 AM
What is a self venting bathroom fan? stovitz99 General Home Improvement Discussion 5 06-19-2010 10:26 AM
Venting problem. Hack HVAC 10 12-17-2007 04:38 PM
Attic venting quigleybmd Flooring 5 07-18-2006 09:37 AM