DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Plumbing Forum > Toilet tank valve replacement




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 09-23-2012, 07:45 AM  
jmc0319
Senior Member
 
Join Date: Jun 2012
Posts: 279
Liked 31 Times on 22 Posts
Likes Given: 5

Default Toilet tank valve replacement

So I changed the insides of my toilet tank. I had the old ball float and exchanged that for a fluid master cylindrical type float. Now it always runs. I even changed the flapper. Anyone ever have issues with fluidmaster? Should I go back to the old ball float?



__________________
jmc0319 is offline  
 
Reply With Quote Quick reply to this message
Old 09-23-2012, 11:07 AM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,361
Liked 38 Times on 33 Posts
Likes Given: 2

Default

Check to make sure the float is not touching something causing it to stay in the down position. It should slide freely up and down.
Also make sure that rubber tube elbow is not sitting so low it's inside the tube.



__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Old 09-23-2012, 01:10 PM  
jmc0319
Senior Member
 
Join Date: Jun 2012
Posts: 279
Liked 31 Times on 22 Posts
Likes Given: 5

Default

Quote:
Originally Posted by joecaption
Check to make sure the float is not touching something causing it to stay in the down position. It should slide freely up and down.
Also make sure that rubber tube elbow is not sitting so low it's inside the tube.
Thanks Joe will check. Not sure what you mean by rubber tube elbow. Is that the rubber fill tube?
__________________
jmc0319 is offline  
 
Reply With Quote Quick reply to this message
Old 09-23-2012, 11:25 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,282
Liked 398 Times on 311 Posts
Likes Given: 163

Default

Another thought . . . The Fluidmaster has an adjustment that sets the height and depth of the float. If it is set too high, it may not trip the shutoff. Try lowering the float so it trips sooner.

Good luck . . .

__________________
CallMeVilla is offline  
 
Reply With Quote Quick reply to this message
Old 09-24-2012, 05:18 AM  
jmc0319
Senior Member
 
Join Date: Jun 2012
Posts: 279
Liked 31 Times on 22 Posts
Likes Given: 5

Default

Will try that too. Thanks.

__________________
jmc0319 is offline  
 
Reply With Quote Quick reply to this message
Old 09-24-2012, 06:11 AM  
jmc0319
Senior Member
 
Join Date: Jun 2012
Posts: 279
Liked 31 Times on 22 Posts
Likes Given: 5

Default

Villa and Joe

Thanks for the replies. I wasn't being clear enough with the issue. It is not a continuous drip like the flapper is not seating properly. It is more like a sudden surge of water every once in awhile.

__________________
jmc0319 is offline  
 
Reply With Quote Quick reply to this message
Old 09-24-2012, 01:24 PM  
Housedoctor57
Member
 
Join Date: Mar 2010
Posts: 40
Liked 4 Times on 4 Posts

Default

That is the sound it makes when the water level in the tank drops due to a leak and water rushes back in through the fill valve to bring the level back to where it should be. Try putting some food coloring in the tank water. Then watch the rim in the bowl itself to see if you have a trickle of colored water. That would indicate the flapper/flush valve is leaking.

__________________
Housedoctor57 is offline  
 
Reply With Quote Quick reply to this message
Old 09-24-2012, 01:32 PM  
jmc0319
Senior Member
 
Join Date: Jun 2012
Posts: 279
Liked 31 Times on 22 Posts
Likes Given: 5

Default

Thanks will give that a shot. Good idea

__________________
jmc0319 is offline  
 
Reply With Quote Quick reply to this message
Old 09-24-2012, 05:45 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,354
Liked 860 Times on 768 Posts
Likes Given: 1487

Default

Make sure there is no crude under the flapper.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 09-25-2012, 02:30 PM  
jmc0319
Senior Member
 
Join Date: Jun 2012
Posts: 279
Liked 31 Times on 22 Posts
Likes Given: 5

Default

Ok so I lowered the float per Villa's suggestion and that seems to have been this issue. I only lowered it a fraction of an inch and it seems to have worked. Thanks to all.



__________________
jmc0319 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Toilet tank valve jmc0319 Plumbing Forum 2 09-19-2012 02:10 PM
Cracked toilet tank trok10 Plumbing Forum 6 11-09-2011 10:24 AM
toilet tank jklinda Plumbing Forum 3 01-01-2011 10:31 PM
Leaky tank shutoff valve locknut Plumbing Forum 9 05-02-2009 12:05 PM
toilet tank leaking into bowl bethany14 Plumbing Forum 8 09-30-2006 11:01 AM