DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Plumbing Forum > Why won't my cold water line to fridge work?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 08-31-2009, 04:12 PM  
NoHoArtsDistrict
Junior Member
 
Join Date: Aug 2009
Posts: 4
Default Why won't my cold water line to fridge work?

My house had a copper water line running from a T-handle valve, piercing one of the cold water lines, and running under the house to the fridge location. I just bought the house, and the line and T-valve were there already.

Seems simple enough and straightforward. I can easily see the T-valve and it doesn't look terribly corroded or rusted.

Yet when I open the valve all the way, no water from the cold water line comes out the end of the copper pipe.

Did I mention my house's plumbing is old galvanized 1946 pipes? Can't understand what the problem would be unless the T-valve is clogged from pipe corrosion. But then, I would at least expect some water dribble out of the copper pipe. But I'm getting nothing, even when I turn on something that uses the same cold water line that the T-valve is piercing. Water comes out fine there.

Can someone offer advice? Thanks!



__________________
NoHoArtsDistrict is offline  
 
Reply With Quote Quick reply to this message
Old 08-31-2009, 08:01 PM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,181
Liked 104 Times on 91 Posts
Likes Given: 61

Default

The lack of dribble indicates a really clogged tap and/or line that will require cleaning or replacing.

__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Old 09-01-2009, 09:15 AM  
majakdragon
Senior Member
 
Join Date: Sep 2006
Location: Lafe Arkansas, Arkansas
Posts: 165
Default

Self piercing valves only make a very small hole. With galvanized pipes, it probably clogged quickly. Turn off the water supply and disassemble the valve from the pipe, cleanout the hole (may take a small drill bit) and reattach the valve. I hate these valves and always install a tee and shutoff valve.

__________________

if you have never made a mistake, you probably haven't done much.

majakdragon is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
I messed with the water line valve and now my sink doesn't work Hippocampus Plumbing Forum 3 06-01-2009 10:39 PM
Moldy water line in fridge colepittman General Home Improvement Discussion 3 01-11-2009 01:36 PM
can I reuse hot/cold water flex lines on gas water heater? gordon Plumbing Forum 2 12-14-2008 12:16 PM
Hot & Cold Water calvinh Plumbing Forum 1 08-16-2007 03:48 PM