DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Roofing and Siding > Insulating the roof edge?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 08-23-2014, 12:03 PM  
Jungle
Senior Member
 
Join Date: May 2013
Posts: 332
Liked 28 Times on 25 Posts
Likes Given: 31

Default Insulating the roof edge?

What is the point of putting sofits here? wouldn't it be better to fill it with insulation?

I think they call this part of the roof , the roof ladder or the rake?



File Type: jpg roof ladder.jpg (49.7 KB, 44 views)
__________________
Jungle is offline  
 
Reply With Quote Quick reply to this message
Old 08-23-2014, 12:07 PM  
oldognewtrick
Moderator
HRT_MODERATOR.png
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 5,395
Liked 458 Times on 381 Posts
Likes Given: 143

Default

That is the rake edge and I've never seen it insulated.



__________________
oldognewtrick is online now  
 
Reply With Quote Quick reply to this message
Old 08-23-2014, 03:20 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,211
Liked 837 Times on 748 Posts
Likes Given: 1453

Default

Insolation is for between warm and cold so there would be no benafit, vented soffit is what is used there.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 08-23-2014, 03:23 PM  
oldognewtrick
Moderator
HRT_MODERATOR.png
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 5,395
Liked 458 Times on 381 Posts
Likes Given: 143

Default

Correct me if I'm wrong Neal, but isn't the outside rafter called the "Fly Rafter" on the rake edge like that?

__________________
oldognewtrick is online now  
 
Reply With Quote Quick reply to this message
Old 08-23-2014, 03:24 PM  
oldognewtrick
Moderator
HRT_MODERATOR.png
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 5,395
Liked 458 Times on 381 Posts
Likes Given: 143

Default

How much overhang do you have on the rake edge jungle? there should be a constant 1/2" running top to bottom past your drip edge on the side.

__________________
oldognewtrick is online now  
 
Reply With Quote Quick reply to this message
Old 08-23-2014, 07:51 PM  
beachguy005
Senior Member
 
Join Date: Sep 2012
Posts: 193
Liked 56 Times on 50 Posts

Default

Looking at the picture I'm wondering if there is a rake fascia board with a drip edge on there. These are installed before the roof shingles. The rake soffit doesn't need to be vented.

__________________
beachguy005 is offline  
 
Reply With Quote Quick reply to this message
Old 08-24-2014, 01:29 PM  
Jungle
Senior Member
 
Join Date: May 2013
Posts: 332
Liked 28 Times on 25 Posts
Likes Given: 31

Default

Yup there is some overhang shingle there. Not finished this area yet, i guess i need to rent a 30ft ladder. It's probably better to put insulation like roxual that does not rot. It should keep cold out of that space that will transfer to the house, corners are always transfer spots.

__________________
Jungle is offline  
 
Reply With Quote Quick reply to this message
Old 08-24-2014, 01:53 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,211
Liked 837 Times on 748 Posts
Likes Given: 1453

Default

Well there is firt for anything.
I don`t see a fascia on the rake, how will hide the edge of the soffet.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 08-24-2014, 02:43 PM  
beachguy005
Senior Member
 
Join Date: Sep 2012
Posts: 193
Liked 56 Times on 50 Posts

Default

Again....looking at the picture, it looks like you shingled the roof before you trimmed it out. No trim or drip edge on the rake or eaves. That's not good.

__________________
beachguy005 is offline  
 
Reply With Quote Quick reply to this message
Old 08-25-2014, 10:04 AM  
mako1
Junior Member
 
Join Date: Mar 2014
Location: Central IL
Posts: 51
Liked 12 Times on 11 Posts

Default

The overhang on the gable end should have been open to the attic.Then you could have installed a vented soffit and ran the j channel for the siding up to it.Ventilating the attic in place of sealing it.Hard to tell from the angle of the pics what you have done.The overhang should never be insulated.It should have vents to work with a ridge vent or such to ventilate the attic space.



__________________
mako1 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Edge of overflow drain wet, but we don't use this tub much texasmaverick General Home Improvement Discussion 2 05-07-2013 05:33 PM
Insulating a Flat Roof Gremlyn Roofing and Siding 3 12-07-2011 07:02 AM
Drip Edge/Flashing Rchaffin Roofing and Siding 6 04-22-2009 07:14 PM
Hello from the edge of nowhere GreenIsGood Introductions 4 02-17-2009 03:06 PM
Flashing/drip edge on roof - questions & advice Westy Roofing and Siding 4 09-24-2007 07:37 PM