DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Roofing and Siding > metal roof is attached directly to trusses. is this code?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 07-05-2009, 01:10 AM  
lesdear
Junior Member
 
Join Date: Jul 2009
Posts: 1
Default metal roof is attached directly to trusses. is this code?

First off, I know nothing about roofing so bear with my wording. I have a coastal cottage with a metal roof built in 1995, I am guessing before any hurricane standards, I am on the gulf coast. My home has open eaves and the metal roof is attached directly to the trusses with no plywood under it. the next layer is the insulation on the floor of my attic. we would like to sell home, but are concerned about this. We bought the house in 1998- first home, young, naive- but it passed inspection. Will it pass a home inspection now with this roof? We have no leaking and as hot and humid as our climate our enrgy bills are not too high. Any advice?



__________________
lesdear is offline  
 
Reply With Quote Quick reply to this message
Old 07-05-2009, 06:03 AM  
CraigFL
Senior Member
 
Join Date: Mar 2006
Posts: 409
Default

You probably need to check local code and the roofing manufacturers recommended practice. A new house was built down the street from me, less than 1000 feet from the gulf, that way so I complained to the building inspector with no results.



__________________
CraigFL is offline  
 
Reply With Quote Quick reply to this message
Old 07-06-2009, 06:13 AM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,147
Liked 94 Times on 83 Posts
Likes Given: 60

Default

Wouldn't this condition be "Grandfathered"?

__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Old 07-06-2009, 07:14 AM  
inspectorD
Housebroken
HRT_MODERATOR.png
 
inspectorD's Avatar
 
Join Date: Dec 2005
Location: Litchfield, CT
Posts: 3,934
Liked 94 Times on 81 Posts
Likes Given: 189

Default sure

Sure it will be grandfathered. However now that it is found to be an issue in todays climate, it may need some upgrades at some point in time. Only your local town official can answer that question.
It is up to the new buyer if they want anything done, some care, some do not.
Good and bad news, It will probably get noted in a home inspection, but the city inspectors cannot make you update the problem unless you change the roof.

Just like GFCI plugs..same issue. Updates only.

__________________

Just My
Made in the

inspectorD is offline  
 
Reply With Quote Quick reply to this message
Old 04-12-2011, 08:16 PM  
dIyblognowdotcom
Junior Member
 
Join Date: Apr 2011
Location: San Francisco, California
Posts: 3
Send a message via Skype™ to dIyblognowdotcom
Default

what you have got is a roof that has what is called "skip sheeting" this method uses 1x4 nailed down with two nails every rafter, but they remove one row and leave a void between the rows of 1x4s. Even if you had plywood sheeting the metal roofing would only be fastened as per the manufactures specs and the plywood would not be nailed down like the ship sheeting is. I think that you have a better roof the way it is and not with plywood. Another reason is metal roofing tends to sweat and the skip sheeting allows for it to dry off and not soak into the sheeting.

__________________
dIyblognowdotcom is offline  
 
Reply With Quote Quick reply to this message
Old 04-12-2011, 08:33 PM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,361
Liked 37 Times on 32 Posts
Likes Given: 2

Default

I've never seen one screwed just to just the trusses but 99% are done like the last posted said over 1 X 4's or 6's. I'm not sure how they could have walked on it if there was no 1"s under it when installing. And there would be almost nothing holding the trusses in alignment.
If it is just to the trusses as you said every time the wind blew you would hear that roof wroring in the wind from all that flex.



__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
How to repair hole in Standing Seam Metal Roof railer Roofing and Siding 4 08-19-2013 01:23 PM
Ventilated Deck for Metal Roof GNiessen Roofing and Siding 0 03-30-2009 03:40 PM
Metal roof procedure ? Mudball Roofing and Siding 14 09-26-2007 02:56 PM
Metal roof and pest mdejon Roofing and Siding 0 07-02-2006 10:02 AM
Metal Roof Problems birch Roofing and Siding 4 03-13-2006 11:13 AM