DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Roofing and Siding > Moss on asphalt shingle roof




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 08-02-2014, 08:40 AM  
DFBonnett
Member
 
Join Date: Apr 2012
Posts: 73
Liked 18 Times on 18 Posts
Likes Given: 11

Default Moss on asphalt shingle roof

Because of heavy shade there is moss on an 8 year old asphalt shingle roof. Removing the trees is not an option at this time, nor is getting on the roof to remove the moss manually. I have sprayed with a strong bleach solution and that worked to a degree but my concern is damaging the shingles. Any advice about a preferable product or method would be most appreciated.



__________________
DFBonnett is offline  
 
Reply With Quote Quick reply to this message
Old 08-02-2014, 09:21 AM  
oldognewtrick
Moderator
HRT_MODERATOR.png
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 5,430
Liked 459 Times on 382 Posts
Likes Given: 147

Default

The less activity you have on the roof the better off for the life cycle of your asphalt shingles.

That being said, ABC Roofing Supply sells a product called "Shingle Shield" that I've used with varying degrees of success. It's is a concentrate that you mix with water and spray with a garden sprayer and rinse with a water hose. Avoid any pressure washer use on the roof, cause it will dislodge your shingle granules and shorten the lifespan of the roof. Repeated applications may be required.

There are Zinc strips that can be installed along the ridge and hips that help to some extent with keeping roofs clean to some extent. If you've ever noticed clean areas below a chimney, it's the wash off from the copper that creates an environment that is not conducive to mold, algae and organic growth.

Next time you have a roof installed, ask that an algae resistant shingle is installed. There are zinc granules incorporated in with the stone granules to help keep organic growth down. If you have a AR shingle, call the MFG and make a claim. They may pay to have a professional clean the roof.



__________________
oldognewtrick is offline  
 
Reply With Quote Quick reply to this message
Old 08-02-2014, 10:21 AM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

If all else fails, for a small area I guess you could heat the roof from underneath. Wood insulates somewhat so perhaps small holes in the sheathing may help with heating the shingles with violating structural rules.

But, how long will it take to know if this works? How fast can you kill that moss with a hair dryer?

__________________
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 08-02-2014, 12:36 PM  
oldognewtrick
Moderator
HRT_MODERATOR.png
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 5,430
Liked 459 Times on 382 Posts
Likes Given: 147

Default

Quote:
Originally Posted by Wuzzat? View Post
If all else fails, for a small area I guess you could heat the roof from underneath.
Are you serious?
__________________
oldognewtrick is offline  
 
Reply With Quote Quick reply to this message
Old 08-02-2014, 12:54 PM  
Chris
Guru of nothing
HRT_MODERATOR.png
 
Chris's Avatar
 
Join Date: Jul 2013
Posts: 1,412
Liked 124 Times on 107 Posts
Likes Given: 30

Default

Last time I drilled holes in my roof it leaked.

__________________
Chris is offline  
 
Reply With Quote Quick reply to this message
Old 08-02-2014, 02:22 PM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

Just the plywood underlayment. Not through holes.

The trick is to make the shingles hot enough to kill the moss but
not hot enough to unduly shorten the life of the shingles.

I have to be more literal.

Maybe reducing attic ventilation will help, over time.

BTW, darker shingles should work better at preventing moss because they will absorb more light and so be hotter, on average.

__________________

Last edited by Wuzzat?; 08-02-2014 at 02:27 PM.
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 08-02-2014, 02:36 PM  
oldognewtrick
Moderator
HRT_MODERATOR.png
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 5,430
Liked 459 Times on 382 Posts
Likes Given: 147

Default

I disagree with everything you've posted here. If you don't have proof that taking these actions work, please don't post them because it will void any warranties available from the shingle MFG's. And you will have a unknowing homeowner doing damage to their home that will cost lots of $$$ to fix.

__________________
oldognewtrick is offline  
2
People Like This 
Reply With Quote Quick reply to this message
Old 08-02-2014, 02:47 PM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

Feel free to delete my posts. Whatever I post that this forum can use, use it. Otherwise, out with it.

Proving what is posted on any forum is a pretty heavy burden, though.

http://en.wikipedia.org/wiki/Burden_of_proof

I'd hope that what I post is "more likely than not" to work (the 51% rule). The "beyond a reasonable doubt" (>95%) level I cannot guarantee, sometimes even with electrical matters.

__________________

Last edited by Wuzzat?; 08-02-2014 at 02:57 PM.
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 08-02-2014, 07:31 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,276
Liked 394 Times on 307 Posts
Likes Given: 161

Default

OldDog ... Interested in the zinc strips ... Can they be applied in long runs above and spaced within the area with moss? A one time remedial repair to the roof could be the answer here. I like the idea ...

File Type: jpg mossy-roof.jpg (57.1 KB, 21 views)
__________________
CallMeVilla is offline  
 
Reply With Quote Quick reply to this message
Old 08-02-2014, 07:40 PM  
oldognewtrick
Moderator
HRT_MODERATOR.png
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 5,430
Liked 459 Times on 382 Posts
Likes Given: 147

Default

I think thats just a tad more than the zinc strips can handle. Yes, they are applied the whole run of the ridge, just below the shingle cap. Then run at a diagonal down the hips (if there are hip) so you have wash off on the entire roof.

We did a huge slate roof that had previous staining. We fabricate a copper strip that was exposed just below the ridge capping so we got wash off of the copper all along the ridge and hips. From the ground you could barely see it.



__________________
oldognewtrick is offline  
inspectorD Likes This 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Asphalt shingle question jmc0319 Roofing and Siding 9 10-22-2012 09:49 AM
Near flat roof leaking should I shingle over? Donny Roofing and Siding 16 01-06-2012 06:56 PM
Best way to cut through asphalt shingles on the roof? TomS Roofing and Siding 2 09-29-2011 05:29 PM
shingle roof bubbling in small area winsox Roofing and Siding 3 05-07-2011 06:12 AM
Hip roof shingle replacement KP1972 Roofing and Siding 4 02-19-2009 07:32 AM