Need table saw recommendations...
I've been assembling a small, DIY home workshop, and I'm in the market for a table saw, and could really use some recommendations. My apologies in advance for a long post. For those patient enough to wade thru it and offer suggestions, many thanks.
Up to $1000. That being said, I'm not married to spending the full $1000. If a $500 saw can meet my needs, then by all means, that's what I'll spend. I don't need the Lexus of table saws, but I refuse to buy junk.
Like many others, I have a small area for my shop. It's a small, detached one car garage. I don't park my car in it, but it serves double duty as storage. I won't have the luxury of setting up my table saw in the middle of the garage and leaving it there. It needs to have a relatively small footprint and absolutely has to be on wheels to move it around.
Bench top - Contractor - Hybrid - Cabinet:
I don't think a bench top will meet my needs, and my budget and/or space restrictions leaves out a cabinet saw. That leaves either a contractor saw or hybrid saw. I like the idea of the hybrid because it eliminates the motor hanging off the back and tends to offer much better dust collection options (although my current dc system consists of a shop vac!) But with most hybrid saws, I will likely have to add around $100 for a mobile base.
No mail order:
I must be able to make the purchase in person, locally as I don't want to have something like a table saw delivered. This shouldn't be a problem, as I have several Lowe's stores, several Home Depot stores, a Rockler store, and a Woodcraft store within very short drives.
I really don't want to have to rewire for 220
High quality fence and miter system
This isn't a tool that will see everyday usage. Nor will I be tackling anything as intricate as building fine furniture. However, as I said, I refuse to buy junk, and I don't want to go with a cheaper saw now, only to find out 6 months from now that I should have spent a few hundred more and gotten better quality/features. I'll mostly be doing some home improvement projects, maybe building some new kitchen cabinets, bookshelves, etc.
Some of the saws I'm currently considering:
Jet JPS 10" ProShop 1 3/4 HP 30" cast wing - $810
(will need to add on a mobile base)
Rigid 10 In. Cast Iron Table Saw Model TS3660 - $549
DELTA 36-716 10'' Hybrid Saw w/30'' DELTA® UNIFENCE®, Rail and Table Board - $1000
(would need to add on a mobile base)
DELTA 36-982 10" Left Tilt CONTRACTOR'S SAW® with 30" BIESEMEYER® Commercial Fence System and Table - $850
Jet JWTS-10 1-1/2HP 10'' Workshop Tablesaw - $580
I'm open to other suggestions as well. At this point, I've been leaning toward the Jet Proshop hybrid, but I keep reading excellent reviews of the Rigid TS3660 and would hate to shell out a grand for the Jet if the Rigid would suit my needs for a little over half of that. I'd really appreciate some help from some more experienced folks.
Thanks in advance!
I don't have any specific brand or model suggestions, but the one thing I wouldn't cut corners on is the fence. A good fence is worth a lot. A crummy one makes your work much more difficult. But it sounds like you already know that!
Consider also a less expensive model, but buying a high quality aftermarket fence/miter system.
I would suggest you consider mail order to get the best bang for your buck. A cabinet saw is about the same size as a 'hybrid'. Also, consider 220v. You may not need to re-wire much. It could be as simple as changing the outlet and breaker. Worst case pulling a single new wire. If its a detached garage it may have a sub-panel so a 220v saw should be easy.
OK, why am I suggesting these things? Check out this saw...
The fence is a clone if the Bies fence and is just about the most perfect fence you could ask for. The companies customer service is top notch and the saw is built like a tank. Its the last table saw your, your kids and grandkids will ever own. I have been extremely satisfied with mine.
I bought the Jet and am happy with it I also bought bench dog router attachment for it and now am looking to sell both for 1000.00 Since I bought dewalt portable table saw don't use anything but. I do still us the jet as my router table but not often, that is why I am going to sell.
It depends upon whether the table saw needs to be portable or not. I like my Porter Cable contractor saw but my next one will probably be a Bosch. If I was doing a home woodshop I would look for a used high end model like a used Delta (not the newer Deltas). Very little that needs to be done to a 20 year old table saw to get it back to new and you get better materials and better machining and aluminum and steel instead of plastic.
We purchased this saw for the job site because of its portability and small storage area for transporting in our trailer. The fence is great and can rip up to like 26". Very good saw and we are very happy with it.
Bosch at Lowe's: 15-Amp 10" Table Saw
SERIOUSLY ???? $1000.00 FOR a table saw your not gonna use much? You either have too much money or not enough freinds lol.
Pick up a craftsman for 250.00 buy the 5 year extended warranty for 50.00. DONE DEAL.
I bought the Rigid last year on sale for about $360 and it's been great. Unless you're building fine furniture it'll be more than adequate for any job you have. My main consideration was space as I have no place to keep it permanently open and ready to use. It folds up and rolls away in seconds. Highly recommended.
Look into the Powermatic brand, they have some great table saws, especially if your going to be using it for some woodworking projects. I know their prices are decent, and you could probably find a used one on ebay for a great deal.
Power Tool Parts & Tool Repair
Just make sure that the work surface is big enough to handle the stuff you want to cut. I have a Craftsman and it has enough power etc. But the size of the table combined with the room in my workshop, makes it a hassle to cut anything big...precisely the kind of stuff I would want to do on a table saw.
|All times are GMT -6. The time now is 02:32 AM.|