DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > 3 inch dryer vent





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 03-08-2010, 12:06 PM  
Djshakes
Junior Member
 
Join Date: Mar 2010
Posts: 2
Default 3 inch dryer vent

Hi Guys. I recently purchased my first home and there is a three inch dryer vent pipe that runs from the garage, through the wall and out of the roof. I used a 4 to 3 inch adapter with metal dryer duct to hook up my dryer (whirlpool duet). Is using a 3 inch dryer vent pipe okay as 4 inch is now the standard. I crawled up on the roof and it was blowing plenty of air out when the dryer was on.



__________________
Djshakes is offline  
 
Reply With Quote Quick reply to this message
Old 03-08-2010, 04:43 PM  
Bud Cline
Tile Contractor
 
Join Date: Apr 2006
Posts: 284
Default

Dryer vents are subject to local building codes. You should check with your local building inspector's office.

I thought 4" was mandatory but maybe not in your area.

If you were required to have a home inspection before you bought the home
and 4" is the requirement, then you may have a claim against the inspector if you incur costs to upgrade the vent.



__________________

[SIZE="1"][B][COLOR="Blue"][CENTER]Some days I aspire to becoming a missing person.[/CENTER][/COLOR][/B][/SIZE]

Bud Cline is offline  
 
Reply With Quote Quick reply to this message
Old 03-08-2010, 05:57 PM  
Nestor_Kelebay
Emperor Penguin
 
Nestor_Kelebay's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, Manitoba
Posts: 1,844
Liked 2 Times on 2 Posts

Default

Djshakes:

Dryers take 4 inch ducting. Ceiling fans take 3 or 4 inch ducting. Your dryer will still work, but the reducer will add a lot of resistance to air flow, and so your dryer will take a bit longer and a bit more electricity to dry your clothes.

Is it not possible to enlarge the hole and run 4 inch dryer vent pipe?

When installing vent piping, the shorter and straighter the vent pipe, the better. Use straight rigid galvanized or aluminum vent piping instead of the vinyl ducting or flexible metal ducting. Also, hold your joints together with duct tape only. Never ever never hold dryer vent connections with screws like they do on flue ducts. Lint can collect on those screws and create a fire hazard.

__________________
Nestor_Kelebay is offline  
 
Reply With Quote Quick reply to this message
Old 03-10-2010, 02:50 PM  
Wuzzat?
Senior Member
 
Wuzzat?'s Avatar
 
Join Date: Jan 2010
Posts: 1,853
Liked 95 Times on 86 Posts
Likes Given: 56

Default

Maybe someone makes booster fans for 3" ducts, if the present ductwork exceeds the dryer installation guidelines for length or diameter or number of elbows.

__________________
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Vent dryer out basement window? nrv1013 General Home Improvement Discussion 4 12-18-2009 01:05 PM
Dryer Vent Debacle WishIKnew General Home Improvement Discussion 12 02-27-2009 04:16 PM
1/2 inch Copper around existing Vent Stack? knewshound Plumbing Forum 14 01-28-2008 12:52 PM
Is it OK to tap into Dryer Vent? Duncanrinaldo General Appliance Discussion 3 09-07-2007 06:15 AM
Dryer vent Blair1955 General Appliance Discussion 9 05-06-2007 03:53 PM