DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > anybody have any experience with diy garage kits/pre built garages?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 04-09-2012, 06:27 PM  
skimmilk68
Junior Member
 
Join Date: Mar 2012
Posts: 11
Default anybody have any experience with diy garage kits/pre built garages?

I'm looking to purchasing a house without a garage and saw that pre built garages were or garage kits were much more affordable than building a garage from ground up.
Anybody here have any experience with these garages? Are they just as good as any garage built by a contractor or are they going to collapse on me in 5-10 years?



__________________
skimmilk68 is offline  
 
Reply With Quote Quick reply to this message
Old 04-10-2012, 02:26 PM  
bsmutz
Junior Member
 
Join Date: Aug 2009
Posts: 4
Default

Sorry, no experience with a kit. When I built my garage, I looked online and found a set of plans for a reasonable price. I paid for the slab, bought assembled trusses from a local company, and had Home Depot order me a garage door and header for it. I also had them deliver the materials. Everything else I did myself, except putting the trusses in place and lifting the header into place. This was about 7 or 8 years ago now, but the whole thing was very reasonable (I would guesstimate around <$10k for 24' by 24'). I already had a nail gun, chop saw, and all the other tools I needed. I got a little guff from the inspector about not using earthquake washers on the bolts holding the sill plates to the slab, but passed anyway. Oh, yeah, I did have a book on house building that was very helpful for figuring everything out. Planning was the hardest part. If the materials are good, I don't see any reason why a kit wouldn't provide a lifetime of use.



__________________
bsmutz is offline  
 
Reply With Quote Quick reply to this message
Old 04-11-2012, 02:03 PM  
BridgeMan
Senior Member
 
BridgeMan's Avatar
 
Join Date: Aug 2011
Location: Cottage Grove, Oregon
Posts: 731
Liked 66 Times on 60 Posts

Default

I would be leery of a "kit garage." Unless you have thoroughly researched the details of exactly what you will be getting for your money. Not speaking from having direct experience with kits, but the logical question is "how can the kit manufacturer be making a profit, unless he's skimping on materials?"

You get what you pay for.

__________________
BridgeMan is offline  
 
Reply With Quote Quick reply to this message
Old 04-11-2012, 05:17 PM  
nealtw
Senior Member
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,006
Liked 690 Times on 617 Posts
Likes Given: 1211

Default

Maybe you could post a link to there site so could really pick on it. It could be a good product but what are you getting? You still need a foundation and it still has to be built, so I suspect you get a set of plans a truck load of material.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 04-11-2012, 06:14 PM  
00Mike
Woodworker
 
Join Date: Aug 2010
Location: Rochester, New York, NY
Posts: 7
Liked 1 Times on 1 Posts

Default

You will also want to make sure the kit & design will meet your local building codes.

__________________
00Mike is offline  
 
Reply With Quote Quick reply to this message
Old 04-13-2012, 11:19 AM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,361
Liked 37 Times on 32 Posts
Likes Given: 2

Default

As stated it really depends on the company.
When I lived in NH there was companys that sold what's called panelized garages. a truck with a boom on it would show up with the walls all prebuilt, they just lifted them off the truck and set them in place, the siding, windows and doors were already installed except the over head door.
In one day to a day and 1/2 the garage would be done.

As far as kits watch out for all the "extras" there going to hit you with.
Some I've seen the standard kit did not include drip cap for the roof or tar paper, 3, tab shingles, T-111 siding, 2 X 3's every 24" for studs, no door knobs, cheap shed single pane windows.

If the walls are not pre built when there delived I see nothing to gain by buying a kit. Lowes, Home Depot both can design a garage or shed on the in house computer and spit out a materials list for you. A local lumber yard may even be able to help you with that. I know I can just leave off a set of plans and they will do the take off for me.

__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Old 04-13-2012, 01:00 PM  
00Mike
Woodworker
 
Join Date: Aug 2010
Location: Rochester, New York, NY
Posts: 7
Liked 1 Times on 1 Posts

Default

I agree with jocaption.

I built a 2 car 2 story garage with an attached shed for my home last year. I searched the Internet for a kit and/or designs that would work for my space but came up empty. I ended up purchasing an inexpensive CAD program and designing it myself. I double checked with a friend that's an engineer prior to giving the plans to our local building inspector for approval. Other than the slab, I did everything myself (with help of family and friends). I purchased dimensional lumber and cedar clapboard siding from a local lumber yard that I've done business with for years and purchased sheathing, decking and shingles from Lowe's. I put about 5k into the 2 overhead doors that I purchased from and that were installed by the Overhead Door Co. I built the man door for the garage and the double doors for the shed myself because the cost for the quality I wanted was too high. I spent a total of about 30k for everything except the driveway (and paint). I did not Sheetrock or insulate. The insurance company appraised it at 65k.

What I'm saying is he's right. You're not saving anything by having someone else put together a bill of materials for you. You're paying for that service. With help from your local building supplier, you can be your own GC and the local retailer is more likely to have plans already approved by your building inspector.



__________________
00Mike is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Home Air Quality Test Kits..... Any Good? JLoc General Home Improvement Discussion 1 02-15-2012 04:55 PM
shower stall kits sisyphus General Home Improvement Discussion 2 07-25-2011 01:04 PM
test kits for water ilyaz Plumbing Forum 7 11-15-2010 07:44 PM
Anyone have experience using PEX? StevenC Plumbing Forum 9 05-12-2010 09:06 AM