DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > attaching gutters to rafter tails




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 10-20-2007, 06:53 PM  
jingle
Junior Member
 
Join Date: Oct 2007
Posts: 3
Default attaching gutters to rafter tails

i just bought a 1940 mill cottage with a tin roof and rafter tails that extend to the roof edge. i'd like to install gutters at certain points where water runoff has caused damage to the cottage. do i have to install a fascia board to attach the gutters to, or can i hang the gutters directly from the rafter tails? if so, how do i do it? is there any problem with using aluminum gutters for a tin roof? aren't certain metals incompatible?

thanks for any help. jingle



__________________
jingle is offline  
 
Reply With Quote Quick reply to this message
Old 10-21-2007, 10:34 AM  
glennjanie
Senior Member
 
Join Date: Mar 2006
Posts: 2,990
Liked 2 Times on 2 Posts

Send a message via AIM to glennjanie
Default

Welcome Jingle:
A facia board is not required, you can nail directly to the rafter tails. There are at least 3 different gutter hanger hardware sets. One, the spike and ferrule, problem is the spike is aluminum too and bends easy; two the wrap around hanger that has a strap going up onto the shingles to be nailed down with 2 or 3 roofing nails, to me its unsightly; three there is a clamp on the top of the gutter hidden from sight with a short nailer at the rear, so you can use one nail per rafter tail, you just need a 'pea shooter' nailer. That is, a piece of tubing large enough for the nail head to go through and a rod that is a little longer than the tubing. You put the nail in the business end, place that end where you want the nail, strike the other end of the rod to drive the nail.
The aluminum should not be touching the tin roof and there will be no problem with electrolisis.
Glenn

__________________
glennjanie is offline  
 
Reply With Quote Quick reply to this message
Old 10-21-2007, 06:55 PM  
jingle
Junior Member
 
Join Date: Oct 2007
Posts: 3
Default rafter tails and gutters

glenn, thanks so much for your reply. sounds like just what i needed to know. jingle

__________________
jingle is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Rafter tail repair/replacement help scott.475 Roofing and Siding 2 08-19-2007 02:21 PM
Rafter tail rot jcmarco74 Roofing and Siding 4 01-14-2006 01:41 PM