DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Attic exhaust fan repair




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 09-04-2011, 10:09 AM  
ThomasHStewart
Junior Member
 
Join Date: Sep 2011
Location: Jackson, MS
Posts: 2
Default Attic exhaust fan repair

I hate to throw away repairable items. After replacing my last 2 attic exhaust fan motors, at a cost of $60 each, up from $25 the last time I replaced them, I asked a local motor repair shop about rebuilding them. They said just replace them. I took one apart and noticed their are no bearing to replace, just a packing resembling cotton or felt, soaked in an oil that evidently lets oil seep out slowly when heat is generated to lubricate the shaft. Other than that there seems no reason this motor would not work as I lightly lubricated the shaft and it worked like new. My question to throw out there is what is this packing. It must be something that exposed to high heat will not ignite.



__________________
ThomasHStewart is offline  
 
Reply With Quote Quick reply to this message
Old 09-04-2011, 10:43 AM  
oldognewtrick
Moderator
HRT_MODERATOR.png
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 4,676
Liked 358 Times on 301 Posts
Likes Given: 121

Default

Now you know my reluctance to recommend power vents on roof installations. After installation most homeowners never pay any attention to whether they are functional or not. Good for you taking the time to check on them and provide maintenance for the units. In all the years I've never taken one of those motors apart, so I can't tell you what the material is. You might find some info on the MFG website or get a costumer service number where you might call and ask.

...and to House Repair Talk!



__________________
oldognewtrick is offline  
 
Reply With Quote Quick reply to this message
Old 09-04-2011, 02:29 PM  
paul52446m
Senior Member
 
Join Date: Oct 2010
Location: Houghton Lake, Mi.
Posts: 435
Liked 1 Times on 1 Posts

Default

I lot of motors have a bell type area where this felt packing is. I take a small pointed punch
and put a small hole in the top side of this bell. This way i can oil these motors and some
times they will go for years. I take my bath fan out every year, clean it out and let some oil run down the shaft. Paul

__________________
paul52446m is offline  
 
Reply With Quote Quick reply to this message
Old 09-05-2011, 05:17 AM  
chrisdev
Junior Member
 
Join Date: Aug 2011
Location: new york city, new york
Posts: 3
Default

though it is a fact home owners do not care about the attic fans has been installed for no of years they need service for further work...

__________________

[URL="http://www.chimneylinerpro.com/"]chimney[/URL]

chrisdev is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Bathroom exhaust fan. Is it ok to vent it through attic & up to ridge vent? lola123go General Home Improvement Discussion 9 05-13-2010 03:58 PM
Exhaust Fan For Bathroom AMI_1575 General Home Improvement Discussion 11 09-29-2008 07:22 PM
repair a pinhole leak in pvc elbow joint in attic baas2008 Plumbing Forum 8 02-04-2008 07:48 PM
Repair Rusted Attic AC Condensate Pan?? robhouston HVAC 2 05-29-2007 05:02 AM
Bathroom Exhaust Fan CAB General Home Improvement Discussion 10 05-16-2007 07:02 PM