DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Beginner Needs Help - Drywall Anchors




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 02-02-2009, 08:15 PM  
romer58
Junior Member
 
Join Date: Feb 2009
Posts: 1
Default Beginner Needs Help - Drywall Anchors

Hi,

I'm not handy but decided to install a closet organizer kit in the bedroom of my Manhattan apartment by myself after a number of equally inept friends told me it was easy. The kit involves a shelf system that hangs from a long support that you're supposed to screw along the top of the closet wall.

After drilling into the drywall, I reached concrete about an inch and half in. From what I can tell, there is 1/2" of drywall, an inch of air, and then concrete. What type of drywall anchor will hold a lot of weight but will only require a screw that is an inch or an inch and a half long? I looked at 1/8" toggle bolts but the minimum length screw that I saw was 2". Help! I'm surrounded by clothes and have no place to hange them.

I was told by the retailer of the closet kit that I could drill a hole in the concrete and then use concrete screws but that would be extremely difficult. It would also require me to notify the building's board, get permission, and then obtain insurance. After agreeing with the retailer that the concrete screws were not the best option, they proceeded to sell me a different type of their brand of anchor, which also doesn't fit.

Any advice you can give me would be much appreciated.



__________________
romer58 is offline  
 
Reply With Quote Quick reply to this message
Old 02-03-2009, 05:37 AM  
inspectorD
Housebroken
HRT_MODERATOR.png
 
inspectorD's Avatar
 
Join Date: Dec 2005
Location: Litchfield, CT
Posts: 4,054
Liked 122 Times on 102 Posts
Likes Given: 286

Default Well

You could return it for a shelf system with sides on it , no ancors needed.
Or you can attach plywood behind the shelving to attach the wire closet to, and attach the plywood to the wall where there is a place to catch a screw.



__________________

Just My
Made in the

inspectorD is offline  
 
Reply With Quote Quick reply to this message
Old 02-18-2009, 01:29 PM  
handyguys
Senior Member
 
handyguys's Avatar
 
Join Date: Feb 2008
Location: USA
Posts: 815
Liked 1 Times on 1 Posts

Send a message via Skype™ to handyguys
Default

Get yourself a stud finder. Don't use anchors at all. Mark the stud locations and screw through your long horizontal support. If that support is pre-drilled with holes for screws you might need to make new holes in the correct locations.

__________________

The Handyguys Podcast [url]http://www.handyguyspodcast.com[/url]

handyguys is offline  
 
Reply With Quote Quick reply to this message
Old 02-18-2009, 04:55 PM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,185
Liked 105 Times on 92 Posts
Likes Given: 61

Default

Go to your big box store and look for a drywall anchor item call "Zip-It". It's a very coarse thread aluminum wall anchor that is rated for heavy use. Easy to install and works well as long as you don't strip them out in the drywall.

__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Old 02-19-2009, 06:57 PM  
hondadrv24
Senior Member
 
Join Date: Feb 2008
Posts: 188
Liked 1 Times on 1 Posts

Default

I agree with handyguys, if there is an inch and a half air gap between the concrete and the sheetrock then someone obviously put 2x2" furring strips on the wall to attach the rock to. a stud finder and regular wood screws are what you need.
Justin

__________________
hondadrv24 is offline  
 
Reply With Quote Quick reply to this message
Old 02-26-2009, 07:10 PM  
lalchak
Junior Member
 
Join Date: Feb 2009
Posts: 10
Default

You need both a studfinder and drywall anchors. Personally I always try to go for studs. Unfortunately sometimes I am in a situation where studfinder wrongly thinks there is a stud and I have already made a big hole, then I'd go with drywall anchors.

Lal

__________________
lalchak is offline  
 
Reply With Quote Quick reply to this message
Old 02-27-2009, 12:44 PM  
nickroqs
Junior Member
 
Join Date: Feb 2009
Posts: 6
Default

Easiest way would probably to just go for the studfinder, but get some drywall anchors too just in case.

__________________
nickroqs is offline  
 
Reply With Quote Quick reply to this message
Old 03-20-2009, 02:11 AM  
Johnboy555
Member
 
Join Date: Dec 2007
Location: Lake Forest, CA (Orange County)
Posts: 52
Default

Hey Guys,
As a Prof Handyman for 35 years I've done a lot of closet organizers, in homes and appartments. What Romer found is the "firewall"(cement block) between appartments. As strange as it seems I've seen where they will "shoot" the furring strips 1X3's to 2x4's into the block horizonally so they don't have to worry about the edges of the drywall.

Anyway.. there's a 3/4" to 1 1/2" gap behind the DW. If the strips are vertical then use a stud finder, and a tiny drill bit to make sure you're hitting wood. If where you're hanging the top piece isn't on studs then the E-Z Anchor is a good choice. I've been using them for years to hang almost anything. The regular size will hold a vertical load (pulling straight down the wall) of 50 lb. each and they have the larger size that will hold 75 lb each. When I use them I always predrill the DW with a 3/16" drill bit, do not use a punch or awl, it breaks the back side of the DW. That way the anchor is exactly where you want it and just in case there is wood behind it you know and the anchor doesn't make a big ugly hole.

Buildex® E-Z Ancor
Using Wall Anchors Including Molly and Toggle Bolts, Plastic Anchors, Expansion Anchors and More from The Natural Handyman Home Repair and Do It Yourself Website



__________________
Johnboy555 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Drywall meets door frame Stirator Windows and Doors 23 11-27-2012 12:25 PM
Soffit Drywall Repair LanceM Walls and Ceilings 6 02-26-2008 07:35 AM
Replacing closet sliding doors with swing doors - drywall question mgirsh Windows and Doors 4 01-02-2008 05:46 AM
height of drywall and finished floor marklevinson1 Flooring 1 04-05-2007 04:18 PM
Drywall problem? Tonton Walls and Ceilings 5 08-17-2006 03:48 PM