DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Best kind of soffit vent?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 11-04-2011, 12:22 PM  
jfm
Junior Member
 
Join Date: Nov 2011
Posts: 2
Default Best kind of soffit vent?

I have a 1500 sf home with hip roof and 2 ft eaves and have to replace the soffit and fascia. When I purchased the 3/8" plywood soffit material and 1"x6" fascia material, I also bought 2" continuous aluminum vent, because I thought it would be easier to install. It doesn't have any screening, however, for insect exclusion, so I'm tempted to take it back and exchange it for something else.

I would be appreciative of any suggestions as to what would be best - keep the 2" continuous or exchange for something else, and, if so, for what?



__________________
jfm is offline  
 
Reply With Quote Quick reply to this message
Old 11-04-2011, 01:28 PM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,361
Liked 38 Times on 33 Posts
Likes Given: 2

Default

Take it back and look for a differant one with a screen built into it.
If you really want to fix this once and for all I'd go with triple 4 vinyl soffit vents and wrap the fasia with coil stock. Yes it will cost you more, but from then on it can never rot or need paint again.



__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Old 11-04-2011, 09:14 PM  
jfm
Junior Member
 
Join Date: Nov 2011
Posts: 2
Default

Quote:
Originally Posted by joecaption View Post
Take it back and look for a differant one with a screen built into it.
If you really want to fix this once and for all I'd go with triple 4 vinyl soffit vents and wrap the fasia with coil stock. Yes it will cost you more, but from then on it can never rot or need paint again.
Does the vinyl soffit material have screen or just holes too small for insects?

Also, I guess this is applied directly to the rafters with no plywood. I considered that, but it seemed to me that it would be too flimsy with nothing underneath. That's why I thought I should go with the plywood.
__________________
jfm is offline  
 
Reply With Quote Quick reply to this message
Old 11-05-2011, 06:50 AM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,361
Liked 38 Times on 33 Posts
Likes Given: 2

Default

The soffit can be bought several differant ways, the best looking one is beaded hidden vent. It looks like bead board and from below you can not see the holes, also the most expencive but for an older home it really looks nice. When I do this style I use vinyl cove moulding made by Certinteed. It looks like cove molding but has a built in 1/2 slot to hold up the soffit.
Any real siding supply carrys it, Lowes and Home Depot would have to special order it.
The other style come with round or slotted holes, no screen and can be picked up at HD or Lowes.
If the plywood you have now is not rotted or falling down I just use a ciruler saw and make about a 4 to 6" wide slot right down the middle of it and install the soffit material right over it. By leaving it in place it gives you something to nail to so the material does not sag. The to ends are held up with J moulding or the cove I mentioned and the other end is held up with the Coil stock fashia bent into the shape of an L. DO NOT USE THE PREFORMED VINYL FASHIA! It will buckel up if it's faced nailed. It needs to be installed by snapping it into what's called utility trim or under sill trim and punched with a special tool that punches out a rectanguler tab to lock it in place but still allow it to expand.
If you do get someone to do this job for you make sure they use PVC coil stock not smooth. It's stronger and the finish holds up much longer.

__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
What kind of kit is this? BDP1999 Electrical and Wiring 7 10-13-2011 04:51 AM
Bathroom exhaust fan. Is it ok to vent it through attic & up to ridge vent? lola123go General Home Improvement Discussion 9 05-13-2010 03:58 PM
What kind of O-ring to use Nestor_Kelebay Plumbing Forum 3 12-10-2009 10:22 AM
replacing a soffit rmaybon Roofing and Siding 2 09-06-2007 04:57 PM
Now this is a one of a kind floor! Deacon Flooring 2 07-13-2007 11:08 PM