DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > A Big Fraternity Project





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 07-17-2008, 08:11 PM  
three105
Junior Member
 
Join Date: Jul 2008
Posts: 4
Default A Big Fraternity Project

Hey I belong to a fraternity at Oregon State University that we're gonna be remodeling a week before school. My dad is a very good contractor and said he would come down and help with everything but I thought I would get some insight from everyone here especially on my room which I may just do myself...



this is gonna be my area... as you can see I don't believe it is dry wall, I believe it is some other material that was used for the walls... (this house is very old, one of the first houses on campus at Oregon State University)

I want to rip them out and have the walls sound proofed by professionals who spray the dead proofing insulation in there, unless there is something better...
then drywall, tape, mud, sand.

and also a rough shot of the ceiling in my area...



as you can see the ceiling has some fabric probably under some particle board or something, I don't know what is above that but I think pieces are suspended by the fabric so whatever is above that must be coming apart...

So here's what I Want to do...

Rip out the walls like I said, sound proof them... take out the ceiling crap... take out whatever is under that fabric....

sound proof/insulate ceiling and walls... rip out carpet and lay down sound proofing material the vinyl stuff you can buy I think... if it's worth it (I have money to do this)

re dry wall dry wall the ceiling or whatever... rip out that old light fixture in the ceiling... maybe prepare it so I can put a light switch in that room because I want to put a sliding door when we build a wall between the rooms... there is about a 3-4 foot little divider wall that i'll rip out and build an actual wall where that was w/ a sliding door if that works...

tape mud sand prime paint everything... paint the sprinkler system to match the ceiling I guess... so probably white because I found a Wine color for the walls I like... get some cushion and white carpet to put for the floor... and a dark black sliding door...

get a new light fixture and install it...

So what do you guys think of the walls (what do you think their made out of... how would I start to rip them out... building a wall I think would be okay but how would I need to build the wall w/ a sliding door in mind... is there any way I could install a light switch for that area because the light switch controlls both lights on either side of the whole room and since I put the wall up with the sliding door it'll be like two rooms... what about the ceiling, etc... can I have a rough outline?)

The other side of the room looks like this...



I'm not as worried because it's not my side... I just wanna rip that wood off if I can... if I can sand down the material on the walls on the right, which is probably behind the wood on the left too... I want to... for a smooth finish to paint... and I would also wanna do the ceiling the same way as my side...

It's pretty much the same situation I think... and what about drywalling the ceiling with the sprinkler system there like that... ???

__________________________________________________ _____________

going on to other area's of the house...



our shower... falling apart pretty much...

would I need to just rip out all the old tile and then probably sand down the old grout or something? My dad will probably help with this but just looking for input...



__________________
three105 is offline  
 
Reply With Quote Quick reply to this message
Old 07-17-2008, 08:14 PM  
three105
Junior Member
 
Join Date: Jul 2008
Posts: 4
Default

no this is not my stuff in there right now it is someone living in the house over summer... none of our guys are there it's basically an apartment over summer so don't judge by the alc!

__________________
three105 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Finally... New Project Questions - Crown Moulding jpeterson Walls and Ceilings 5 11-08-2008 09:21 AM
Looking for some STUCCO advice (About to start project) BimmerJon Bricks, Masonry and Concrete 1 05-14-2008 07:32 AM
Project #1 new entry door hopelesslyinept Windows and Doors 3 04-30-2008 06:41 PM
Project Overview Help - Bathroom gao6777 General Home Improvement Discussion 0 08-04-2007 11:59 AM