DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   General Home Improvement Discussion (http://www.houserepairtalk.com/f45/)
-   -   Exterior bathroom vent (http://www.houserepairtalk.com/f45/exterior-bathroom-vent-15251/)

dthornton 12-22-2012 12:12 AM

Exterior bathroom vent
 
I have two bathrooms back to back on the second floor. As part of remodeling, I have put bathroom vents in the ceilings. The roof is maybe 3 feet or so above the vents. I was planning on getting ducts/vents to route these through the roof, but upon researching it I've found that some professionals do not recommend this due to the possibility of leaks if not installed just right. With a fear of heights anyway, :hide: I'm not about to attempt to get up on the roof and attempt this myself, so that would mean paying a "professional". I've decided to vent through the end wall (only about 4' or 5' from the vent boxes in the ceiling). For aesthetic reasons, I would prefer to not have 2 vents coming through the wall - this is an 1890 house with the original wood siding. :help: 1. Can I run both ducts (4") into one vent through the wall? 2 . Are there any exterior vents that wouldn't visibly stick out like those dryer-vent hoods do? Thanks!

Wuzzat? 12-22-2012 07:47 AM

Quote:

Originally Posted by dthornton (Post 81329)
I have two bathrooms back to back on the second floor. As part of remodeling, I have put bathroom vents in the ceilings. The roof is maybe 3 feet or so above the vents. I was planning on getting ducts/vents to route these through the roof, but upon researching it I've found that some professionals do not recommend this due to the possibility of leaks if not installed just right. With a fear of heights anyway, :hide: I'm not about to attempt to get up on the roof and attempt this myself, so that would mean paying a "professional". I've decided to vent through the end wall (only about 4' or 5' from the vent boxes in the ceiling). For aesthetic reasons, I would prefer to not have 2 vents coming through the wall - this is an 1890 house with the original wood siding. :help: 1. Can I run both ducts (4") into one vent through the wall? 2 . Are there any exterior vents that wouldn't visibly stick out like those dryer-vent hoods do? Thanks!

Two pipes into a single vent will increase back pressure so your fans may not live up to their posted CFM.
For bathrooms, 8 air changes per hours are recommended so a bathroom 8' H x 5' W x 7' L is 280 cu ft, 8/hr would be 2240 cu ft in 60 minutes would be 37 CFM.

The eyes of passersby probably will not be drawn to two vents on the side of the house.

I've installed both kinds with no leaks that I know of; you have to follow the installation instructions.

Roofing places may sell safety harnesses for roof work. These things will pay for themselves in a big hurry.
A 14' fall is to be avoided at all costs and half the people die from a ~35' fall (the other half wish they were dead).

dthornton 12-23-2012 01:39 AM

Wuzzat> Thanks for the advice. I have no intentions of getting up on my roof, with or without a harness!!! LOL. 2 story, steep pitch, and I don't like heights anyway. :hide: I think that one of my vents is 100CFM, and the other is 110CFM. I definitely don't want back pressure to hamper their performance. Broan has vent kits for either roof or side mount, but I would prefer that the vents don't attract any attention. There are also several 4" diameter dryer vents available. The vents will come through the wall about 3' above the bathroom windows, under the roof peak. Any suggestions for making them blend in? Any recommendation on a specific brand or type vent? Thanks again!

oldognewtrick 12-23-2012 07:03 AM

Paint the vents the color of the walls and they won't stick out like shinny aluminum does. If you are not comfortable climbing on the roof, you made the correct decision to vent through the wall. You also might want to check with your local code authority to see what the codes are for venting, it could be an issue if you ever sell the house.

dthornton 12-23-2012 07:21 PM

Thanks, oldog. There actually are no building codes here. I only have to follow Iowa electrical codes; thankfully they allow homeowners to do their own wiring provided that all wiring has to be (state) inspected. Rehabbing a house is a lot more difficult than I imagined. Kind of like grabbing a rattlesnake by the tail end and swinging it around ... now that you got hold of it, you don't dare let it go! :beer:


All times are GMT -6. The time now is 06:14 AM.