DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Final Thoughts on Renovation




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 06-28-2012, 09:20 PM  
johnnymnemonic
Member
 
Join Date: Oct 2011
Posts: 41
Default Final Thoughts on Renovation

So anyway I was promising everyone that I'd keep you updated on the various threads I opened with questions. I should begin though by thanking you for all your help throughout. You've been a valuable resource.

The threads were:
http://www.houserepairtalk.com/f45/subfloors-12639/
http://www.houserepairtalk.com/f45/renovation-paying-civil-engineer-inspections-12518/
http://www.houserepairtalk.com/f45/cleaning-question-12543/
http://www.houserepairtalk.com/f45/bath-tub-installation-12544/
http://www.houserepairtalk.com/f45/condo-renovation-gotchas-12429/
http://www.houserepairtalk.com/f45/blocking-12517/
http://www.houserepairtalk.com/f45/studs-wooden-steel-12457/

Current status: complete but for minor details.

In the end, my contractor did not fix the squeak around the girder that we had asked him to fix. It had been a mistake originally admitted to (but at the same time which he had shrugged off). The contractor had tried to fix it with, erm, spray foam.

A different squeak has appeared around the girder after we installed the closet, armoire and closet doors. The mistake made around the girder probably spans its length (i.e. they forgot to put some wood on top of the girder to give continuity to incoming joists), so putting weight around the area of the girder, as is the case with closet/armoire/closet doors can exacerbate the problem by adding squeaks. We'll have to live with it.

The contractor also did not have the floor people sand the floor. When we uncovered the floors, there were mill marks on virtually all the wood. Needless to say, we redid the floor with a third party and are very happy with it now. He must have done this to save time, because we had made him let the wood acclimatize longer than he wanted. I don't remember the acclimatization duration, but it was the one recommended by the hardwood floor vendor.

For the bath tub and bathroom tiles, our contractor used grout and not the other material which seals better. As a result, there were cracks in the bath tub grout through which I could sometimes feel a draft. This should tell you about how well he sealed behind the bath tub, yet another thing which we had asked for and which he apparently didn't do. We had someone else put the other material (forget the name).

Because of these mistakes, we finished parts of the job with third parties. This includes dishwasher/stove (my plumber managed to put a dent in my floors with the stove even though it has wheels), kitchen tile (job was good), fireplace.

(DK Fabrications in Long Island did a terrible job with the fireplace. They put only silicone below the hearth -> squeaks. They took it out. They were going to reinstall, but declined to use the thinset chosen by us. We installed with someone else while DK was to remain responsible for remeasuring and returning the parts. They made mistakes with the measurements resulting in various delays and made no effort to be expeditious about the multiple deliveries, being late by hours at a time. I don't recommend them. They were giving me the usual "this is the first time this ever happened to us", which reminds me of my land lady, who had said the exact same thing to us when we asked for more heat in winter, and then to our surprise we found out she had said the exact same thing to a neighbor with the exact same complaint. That should tell you all. I warmly don't recommend them.)

A final payment for the contractor was retained and while we're not sure if we're even or if the contractor still owes us money, we're going to leave it at that.

Our thoughts on this contractor? He disregarded some of our requests, he hurried to finish his job at the cost of keeping us informed and giving us the opportunity to choose, he wasn't on site all the time like he had promised. (He wasn't on site when the girder mistake was made. Per his remark, he was building his countryside home around the same time he was renovating our place, so I suppose that's where he was. Go figure.)

Lessons learned? Although our contract was quite thorough, we will be an order of magnitude more thorough with our next one, if we get to that. We'll have to tell the contractor where to use grout, the electrician not to put a 10 A towel rack on a 15 A circuit shared with the central outlet in a small condo, where it's most likely we will want to use our 5 A vacuum cleaner, and so forth. Probably an architect will have to put everything on a plan. And maybe we should have someone on site all the time, chiefly a project manager.

Let me know if any questions come up.



__________________
johnnymnemonic is offline  
 
Reply With Quote Quick reply to this message
Old 06-28-2012, 09:32 PM  
johnnymnemonic
Member
 
Join Date: Oct 2011
Posts: 41
Default

Forgot to mention the contractor installed the various bathroom knobs and they came out too easily if pulled (if leaning to turn a knob above the tub, you sometimes turn it and pull at the same time). The bath tub/sink seller saw pictures sent by us and said that certain pieces were missing from the installation. Bummer.



__________________
johnnymnemonic is offline  
 
Reply With Quote Quick reply to this message
Old 06-28-2012, 10:38 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,766
Liked 802 Times on 715 Posts
Likes Given: 1362

Default

It looks like you have done every thing you could to educate your self as this job has proceeded and I sorry you didn't get better results.
There really is no good answer to poor workmanship. Even if you had a super general contractor on the job every day, he would have time lines in his schedule and pushes one contractor to finnish up so someone else can get in the next day and things get missed or hurried.
The timeline is the killer on most jobs, if you had all the time in the world you have one company do demo work and then bring in defferent companies for framing, hvac, plumping, electrical, insulation ,drywall, flooring, finnish work and then painting.
If these guys are all different contractors they all look for checks when they are done, you get to inspect everything as the job goes along and you only have to learn one trade at a time. It just takes way to long for most people to do it this way.

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 07-05-2012, 12:13 AM  
BridgeMan
Senior Member
 
BridgeMan's Avatar
 
Join Date: Aug 2011
Location: Cottage Grove, Oregon
Posts: 738
Liked 75 Times on 67 Posts

Default

Of course, the very simple and obvious remedy for all of the problems you experienced is to simply do every thing yourself. Act as your own G.C., and get appropriate and reliable subs as required--fewer the better. Take a leave of absence from work, put the wife to work to keep groceries on the table. No one to blame for junk quality work, and this is the one sure way to know that every thing is being done correctly.

__________________
BridgeMan is offline  
 
Reply With Quote Quick reply to this message
Old 07-05-2012, 12:05 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,766
Liked 802 Times on 715 Posts
Likes Given: 1362

Default

Stanley: You should have read all the posts refered to here you would have found that this was not a win win situation for Johnny.



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Steel studs? Thoughts? mrb Framing and Foundation 1 03-14-2012 10:17 PM
Fiat, Chrysler deal is final. Who really runs the company now? dakuda General Chit-Chat 1 06-10-2009 09:26 PM
Kitchen Remodeling thoughts michael123 General Home Improvement Discussion 0 07-23-2008 01:03 AM
Thoughts on cork flooring Outbacker Flooring 2 09-09-2007 05:53 PM
thoughts on cork and linoleum cebete Flooring 1 10-01-2005 09:34 AM