DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Fireplace Remodel Ideas




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 11-18-2011, 10:56 AM  
hominamad
Junior Member
 
Join Date: Nov 2011
Posts: 1
Default Fireplace Remodel Ideas

Hi everyone - came to this site looking for some ideas on how to remodel my fireplace and stumbled upon these forums. What a great resource.

I was hoping some of you could give me some ideas or tips for a fireplace refacing I want to do. I posted a photo of the fireplace as it is below. My first inclination was try to strip that white paint off the bricks but after researching around, this just doesn't seem like a viable option. Besides, once I started seeing some other fireplace projects, I started getting some other ideas.

The way I look at it - I could go two different ways with this: a) Complete redesign - take down and replace the mantle, retile the whole thing with a new mantle, doors, etc. Or.. b) leave most of it as-is and just tile over the bricks and possibly the mantle.

I am leaning more towards option (b) because I'm a new home-owner and this would be my first real DIY home improvement project and also for $$$ reasons. I don't want to take on more than I can handle.

I'm not sure what kind of material this mantle is. It is completely solid and feels to me like stone underneath. I would like to replace it if that were feasible as it's kind of a boring rectangle shape. It seems incredibly heavy and attached to the wall though. Is it possible to just tile over this as well?

I was thinking of doing some neutral-color, larger tiles on top of the bricks, and then some small colorful mosaic type tiles to cover the mantle.

Also as far as the floor (hearth?) - it is some kind of red floor tile now which I don't hate. But if I wanted to try to raise it with some kind of stone on top, would I have to raise the fireplace floor as well? This seems like it might be "out of my league" as well.

Thanks everyone for your help!

H

(Excuse the bad quality photo - I took it quickly on my way to work)



__________________
hominamad is offline  
 
Reply With Quote Quick reply to this message
Old 11-18-2011, 06:43 PM  
joecaption
Senior Member
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,361
Liked 38 Times on 33 Posts
Likes Given: 2

Default

You should not tile directly over that brick, for #1 It been painted and most likly would not stick, #2 it will be two rough and uneven. You could however cover it with tile board with a layer of thin set under it to bed it and fill in some of the low spots then Tap Con screw it to the brick. For that small a fire place I would not use large tiles. Buy some and hold them up and you can see what I'm talking about.
If that mantel is also painted it may or may not stick. You can try a few and let them sit a few days and see if they just pull off, if not tile over it with no tile board. It's simple enought to remove them if it does not stick.
Do not buy premixed thin set, buy it in a bag and mix it yourself. Buy some spacers to keep them even.
The pictures to dark and there's to much stuff in front of the Hearth to see it.



__________________
joecaption is offline  
 
Reply With Quote Quick reply to this message
Old 11-20-2011, 12:13 AM  
Big_Bill
Junior Member
 
Join Date: Nov 2011
Location: Western Upstate NY, NY
Posts: 6
Default

Had this in my email a few weeks ago, from Ron Hazelton's site: How to Make a Fireplace Mantel and Tile Surround • Ron Hazelton Online
Might try something similar myself... was thinking of 12"x12" granite tile.

__________________

Last edited by Big_Bill; 11-20-2011 at 12:22 AM.
Big_Bill is offline  
 
Reply With Quote Quick reply to this message
Old 04-04-2012, 12:39 AM  
hannah_p
Junior Member
 
Join Date: Apr 2012
Posts: 2
Default Similar question

Hi all -

I am also looking to redo the front of my gas fireplace. Currently, it is covered with (very ugly!) 12" tiles. I would like to rip them off, and replace them with a faux rock product I found here in town. The manufacturer says it is heat safe, and I've used it on a feature wall with great success - screws right into the drywall and looks fantastic!

My question is: is it safe to drill straight into the firebox (which I assume is drywall), or could there be something behind it that I should be aware of? Mostly I ask this question, because one of the tiles near the top appears to have a 'lump' in it, which tends to get pretty warm when the fireplace is on, and I have no idea why! If people think it *is* okay, then how do I best remove the tiles?

Alternately, is there a way to drill the product into the tiles without removing them (my husband says no and I'm guessing he's right, but thought I'd throw it out to the experts.

Thanks for any suggestions you can offer!

__________________
hannah_p is offline  
 
Reply With Quote Quick reply to this message
Old 04-04-2012, 07:21 AM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,246
Liked 842 Times on 752 Posts
Likes Given: 1459

Default

Knock the tile off!



__________________
nealtw is online now  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
20A gfi in remodel art Electrical and Wiring 2 11-18-2010 07:35 PM
Bathroom remodel Dean07 Plumbing Forum 1 08-28-2010 12:32 PM
Tub Remodel baggywinkle General Home Improvement Discussion 5 08-24-2009 02:52 PM
need ideas for ugly fireplace Portus General Home Improvement Discussion 6 12-01-2008 10:05 PM
Basement Remodel oohum02 General Home Improvement Discussion 7 01-25-2008 07:28 AM