DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Framing out drywall pass through question




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 09-23-2013, 08:00 AM  
Camilledavis
Junior Member
 
Join Date: Sep 2013
Posts: 1
Default Framing out drywall pass through question

We are moving in to a new house that's very builder grade. There are several pass through doorways off the living room that were simply drywalled and bull nosed. I'd like to frame them out with molding. My question is do we need to remove the drywall back to the door frame or can we apply the wood over the existing drywall.. I'd like to do more of a craftsman style frame out with maybe 1x 4 or something wide.. Any suggestions would be appreciated.. Also if drywall is needed to be removed how far back so you cut it?



__________________
Camilledavis is offline  
 
Reply With Quote Quick reply to this message
Old 09-23-2013, 06:21 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,263
Liked 848 Times on 757 Posts
Likes Given: 1464

Default

You can do either, if you remove the drywall you will find that there is a metal corner bead that overlaps the corner 1 1/2" on each side of the corner. You can smash off the filler and remove the nails or screws holding it there and remove it and then just remove the drywall on the face of the opening. If you don't remove the corner bead you will have to have wood cut to fit the opening and it makes the opening smaller. But the normal is to use 4 1/2" wide wood to trim this but even with the bead removed, depending on how much filler there si past the bead, 4 1/2 inch may not fit.

__________________
nealtw is online now  
 
Reply With Quote Quick reply to this message
Old 09-24-2013, 07:06 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,272
Liked 393 Times on 306 Posts
Likes Given: 161

Default

Neal's point is excellent. By removing the corner bead, you can also remove the drywall in the pass thru back to the framing. Then, when you apply Craftsman style jamb casing, (3/4" wood) your finished opening will be almost as wide as the existing opening. The side pilaster casing will cover the wall damage where you removed the bullnose. The top pediment casing will handle the top.

Here is a nice chat-up about your style ...
http://thriftydecorchick.blogspot.com/2013/04/diy-craftsman-door-trim.html

__________________
CallMeVilla is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Fireplace question - attaching framing/sheetrock infidex Bricks, Masonry and Concrete 2 06-09-2013 09:50 PM
Split-Level Framing Question kobelleprop General Home Improvement Discussion 5 04-27-2008 11:25 AM
Framing question GolfnRL Framing and Foundation 6 03-25-2008 03:37 PM
Framing For a Drywall Ceiling: tomtoolman12345 Framing and Foundation 4 03-10-2008 07:33 AM
Updating 100 amp box to 200 with pass through keoke Electrical and Wiring 1 07-15-2007 07:50 PM