DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Garage door reverses




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 10-25-2006, 08:10 PM  
Squeeker
Junior Member
 
Join Date: Oct 2006
Posts: 1
Default Garage door reverses

Hey guys...I have a wooden garage door with a Sears opener on it. A few weeks ago i had one of the springs break. I replaced both with a matching set. Now when you press the button to close it. It will go almost all the way down and then reverse automatically, as if it would hit something. I have tried adjusting the downpressure switch to no avail. If you hold the interior button and release it when the door is all the way down there is no problem. Is there a way to bypass the safety switch? I realize this is not a correct repair, but I live in a rural area, no kids, pets etc. and it would be OK here! Any help would be greatly appreciated. thanks in advance!



__________________
Squeeker is offline  
 
Reply With Quote Quick reply to this message
Old 10-26-2006, 05:54 AM  
CraigFL
Senior Member
 
Join Date: Mar 2006
Posts: 409
Default

It sounds like you have a door with two extension sprngs -- one on each side? The ones you bought may not be matched closely causing the door to cock on the way down and jam causing ther overload to trip and raise the door(safety feature against blockage). If you have a spring scale(fish scale will work), you may want to check the extension force for a given extended length to be sure.

If the spring is a match to the other one, you need to be sure that they are both extended equally when the door is closed. This will give approximately the same force. You will need to adjust the cable length so this happens.

Although you shouldn't bypass the safety feature, there is usually an adjustment for the trip force on the opener. You instructions should show you how to do this.

__________________
CraigFL is offline  
 
Reply With Quote Quick reply to this message
Old 10-26-2006, 07:43 AM  
Quattro
Massive Tool Belt
 
Join Date: Oct 2006
Posts: 262
Default

Yup, there should be a screw somewhere on the unit that you can adjust. This will allow more or less force applied against the movement of the door to cause the opener to reverse.

__________________
Quattro is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Tilson Home's cracked concrete garage stoker Bricks, Masonry and Concrete 16 07-25-2013 03:59 PM
Grounding Garage Imacarguytoo Electrical and Wiring 2 10-20-2008 07:38 PM
Overheating Garage wheelman General Home Improvement Discussion 14 12-20-2006 11:29 AM
Firewall questions on garage frank754 General Home Improvement Discussion 5 07-31-2006 07:22 PM
Cieling In Garage Addition Will Carpentry and Woodworking 10 06-24-2006 03:48 PM