DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Need Advice for remodel project




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 06-16-2009, 12:43 PM  
KimTaylor
Junior Member
 
Join Date: Jun 2009
Posts: 1
Default Need Advice for remodel project

Hi All,

My name is Kim Taylor. I'm new to this forum and desperately need some assistance getting started with a remodel project for a friend. I'll say it right off, "I'm not an interior designer". I simply want to help my friend find some unique baseboards, casing, and crown moulding to refinish her living room.

I want to find some unique trim to show her, but I don't know where to begin looking in the Jackson, MS area. Can anyone suggest a company or web site that will give me some options.

Thanks in Advance,

Kim



__________________
KimTaylor is offline  
 
Reply With Quote Quick reply to this message
Old 06-17-2009, 05:09 AM  
locknut
Member
 
Join Date: Apr 2009
Posts: 75
Default

Kim: If your area is anything like mine you have a wide source of outlets to peruse. There's probably a Home Depot and Lowes close by that have a fairly wide selection of moldings and whatever you'd need. There are likely also Millwork dealers that should have more variety and specialty (and pricey) items of interest. You can search the Internet, but sifting through the actual woodwork, I believe, will be more fruitful. The independent stores may be more cooperative in showing what's available and involved for the job. Keep in mind that the fancier the molding, the more skill will be needed for a proper fit and finish. Good luck on your project.



__________________
locknut is offline  
 
Reply With Quote Quick reply to this message
Old 06-17-2009, 11:41 AM  
Steve1976
Junior Member
 
Join Date: Jun 2009
Posts: 6
Default Suggestion for Trim Supplier for Remodeling Project

I recently ripped up all base and door trim at my house in Columbia, TN. I was happy to replace it with anything, but my wife (aka The Project Manager) wanted to find something unique that would make our house stand out from others on the block. We looked at several places and decided to use material from Cox Interior.

I'm glad my wife was so insistent on finding the perfect finish trim for our house. The poplar base, casing, and crown moldings are unlike anything in any house in our neighborhood. They painted up beautifully and delivery to my house was FREE.

I learned a lesson from my wife. When it comes to your home, never settle for second best.

Good luck with your project and I hope this helps.

__________________
Steve1976 is offline  
 
Reply With Quote Quick reply to this message
Old 06-17-2009, 12:57 PM  
handyguys
Senior Member
 
handyguys's Avatar
 
Join Date: Feb 2008
Location: USA
Posts: 815
Liked 2 Times on 2 Posts

Send a message via Skype™ to handyguys
Default

Welcome Kim - Keep in mind that you can create a unique, and even magnificent, look by using boring stock moldings from the home center (There is a Home Depot in Jackson as I recall, just off the interstate).

The technique is called doing a 'built up' baseboard or a 'built up' crown.
I googled a bit and found this picture

This baseboard is actually made from FIVE different standard trim pieces that all could be found at Home Depot.

As for tool - I strongly recommend you use an air nailer. doing this job by hand will be difficult to say the least. A miter saw would be very useful too.

Start out with a book. I have
https://www.amazon.com/dp/1580111815...ZKQKH4S14BSWX&

It will give you a lot of ideas.

__________________

The Handyguys Podcast [url]http://www.handyguyspodcast.com[/url]

handyguys is offline  
 
Reply With Quote Quick reply to this message
Old 06-17-2009, 04:52 PM  
BigSis
Junior Member
 
Join Date: Jun 2009
Posts: 6
Default

wow that is a great idea! thanks so much for sharing...



__________________
BigSis is offline  
 
Reply With Quote Quick reply to this message
Reply


Tags
baseboards, casing, crown

Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Tub Remodel baggywinkle General Home Improvement Discussion 5 08-24-2009 02:52 PM
Bath Remodel nthe10ring Flooring 3 10-26-2008 06:31 PM
R40 remodel cans still available? TaskBoy Electrical and Wiring 3 06-29-2008 10:41 PM
Looking for some STUCCO advice (About to start project) BimmerJon Bricks, Masonry and Concrete 1 05-14-2008 07:32 AM
Basement Remodel oohum02 General Home Improvement Discussion 7 01-25-2008 07:28 AM