tractng

Guys,

Looking to put up a 35" x 80" plas-tex polywall inside my trailer (replacing wallpaper). Half of the sheet will be on the wall and the other half is on the ceiling (curves up). Below is the link of the plastex product.



PLAS-TEX® PolyWall


http://www.parklandplastics.com/polywall.shtml


Would using loctite paneling adhesive work? I won't be using any nails. Hopefully it will stick in a short time so I don't have to hold it. Anybody has any experience with it?


Loctite

http://www.homedepot.com/h_d1/N-25ecodZ5yc1v/R-202538710/h_d2/ProductDisplay?catalogId=10053&langId=-1&keyword=loctite&storeId=10051

Thanks,
Tntrac

nealtw

Parkland has a tole free number in there instructions.

joecaption

I'm 100% sure it's not going to work.
I tryed that exact material, with the same adhesive on a very slightly curved roof on a pump house a customer had made out of sanded plywood.
It just would not stay stuck.
We ended up having to use the white plastic rivit look things made for installing that type panel.

If you had a perfectly flat wall it may work, but around a curve, I do not see it happening.

tractng

Thanks. Maybe just do wallpaper and call it a day.