DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Removing & replacing ceramic tile around tub




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 01-17-2006, 07:58 AM  
brassygirl
Junior Member
 
Join Date: Jan 2006
Posts: 2
Default Removing & replacing ceramic tile around tub

We have a 1950's home w/ original tub and tiled surround wall that go all the way around the entire room. We had to upgrade our fixture and went from a hot and cold faucet to the single one lever unit. So now, of course we have a few patched holes and need expert advice on how to remove those areas and replace with new tiles. We are worried during the process that other tiles may crack thus leading to a complete redo which is NOT a possibility. :-( What is the best way to remove and replace these tiles (what products do we use for behind the tiles, to adhere, etc.) Has anyone done this and had the cracking domino effect happen? Also, to top it off, my hubby dropped the handheld showerhead and it hit and broke the handle off the soap dish in the wall so we'll need to replace that also if we can find one the correct size. Please help as we are not very experienced DIY'ers and appreciate any info you can give. Does anyone know an experienced tile repair person in the Metro Detroit area? Some people have said we should put a piece of metal around the area but I think that would look terrible and it won't help with the soap holder situation. Looking forward to any help.



__________________

Last edited by brassygirl; 01-17-2006 at 08:01 AM.
brassygirl is offline  
 
Reply With Quote Quick reply to this message
Old 01-29-2006, 07:40 PM  
inspectorD
Housebroken
HRT_MODERATOR.png
 
inspectorD's Avatar
 
Join Date: Dec 2005
Location: Litchfield, CT
Posts: 4,073
Liked 122 Times on 102 Posts
Likes Given: 300

Default Local plumbing supply house

If you check out your local supply house and not the box stores , they have your solution in the form of a large cover plate for this exact installation you had done.

Happy hunting
Brian



__________________
inspectorD is offline  
 
Reply With Quote Quick reply to this message
Old 03-06-2006, 12:09 PM  
mrjetskey
Junior Member
 
Join Date: Mar 2006
Posts: 2
Default

If you choose not to use the large cover plate,tiles are relatively easy to remove,the key is patience and finesse.take a grout saw available for 6 or 7 $s gently saw out all the grout around the tile,then using a center punch break the tile in a few places then using a couple of metal painters helpers(scrapers) pry off the broken pieces,then prepare the surface and put new tiles in place,now this is much more difficult than adding the large cover plate,but it is an answer to your question!

__________________
mrjetskey is offline  
 
Reply With Quote Quick reply to this message
Old 05-31-2006, 07:30 AM  
brassygirl
Junior Member
 
Join Date: Jan 2006
Posts: 2
Default

Thanks for the info mrjetskey's! I guess I'll try the tile replacement.

__________________
brassygirl is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Replacing vinyl tile wendyB General Home Improvement Discussion 8 12-10-2009 05:11 AM
Ceramic Tile In Basement allworld Flooring 4 12-16-2007 09:30 PM
Some Ceramic Tile questions Will1987 Flooring 5 06-05-2007 12:48 PM
Ceramic Tile on Concrete Slab onryx2 Flooring 2 09-05-2006 09:11 PM
will vinyl tile stick over ceramic ruby Flooring 1 10-10-2005 08:20 PM