DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   General Home Improvement Discussion (http://www.houserepairtalk.com/f45/)
-   -   Replacing a sliding glass door (http://www.houserepairtalk.com/f45/replacing-sliding-glass-door-697/)

Outbacker 04-28-2006 10:18 PM

Replacing a sliding glass door
 
I have replaced 2 sliding glass doors with French doors, and tomorrow is my third. But I cannot recall how wide the flange is on the sliding door that is nailed to the frame under the stucco. I have a masonry cut off wheel, and I will use that to cut the stucco around the door to remove it, and I cannot recall how far out from the door frame to cut. I think it is 1 1/2 inches around the perimeter. Can anyone confirm this, or make a suggestion how far out to cut. Thanks.

glennjanie 06-06-2006 02:16 PM

The flange I have seen most often is 1-1/2" but you never know for sure. Different brands may use a different size.
Glenn


All times are GMT -6. The time now is 01:04 PM.