DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Site Plans for addition; Am i getting ripped off?




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 05-21-2007, 12:09 PM  
RoninGT
Junior Member
 
Join Date: May 2007
Posts: 1
Default Site Plans for addition; Am i getting ripped off?

Site Plans for addition; Am i getting ripped off?

I'm having plans drawn for some remodeling and addition work i will have done. The plan calls for a 3 car garage in the backyard, a connection between the garage and the house, and closing in the carport to create a great-room.

Square footage wise it is about 700-800 for the garage, and about 300 for the carport and the connection.

They are charging me $1500 for the architectual drawing, and the engineering drawings. This breaks down to:

Two permit drawings $1100
Site Plan $200
Energy Calculations $200
Now i find out that i need to have a topographic survey done. None of the survey companies want to do the topographic without doing a boundary survey. I have an old, but valid boundary survey, but they say they want to do their own. The company that did the boundary survey no longe excists.

So basically now i find out it will cost me another $600 in addition to the $1500. I feel like i'm getting ripped off. They architects must have known how much a boundary and topographic survey would cost, and that is why they gave me a low ball offer.

Am i wrong with feeling ripped off, or is this cost in line with standards in South-west florida? (Tampa)

Thank you,


__________________
RoninGT is offline  
 
Reply With Quote Quick reply to this message
Old 05-21-2007, 04:49 PM  
glennjanie
Senior Member
 
Join Date: Mar 2006
Posts: 2,992
Liked 2 Times on 2 Posts

Send a message via AIM to glennjanie
Default

Welcome to the Forum RoninGT:
Florida has been the home of so many real estate and development scams, not to mention the hurricane repair scams. The state and the counties are trying to protect you but it costs a tremendous amount for protection. I don't think the Mafia would charge that much.
Yes, you probably are being ripped off but when you check with the local code inspector you will most likely find it is all required.
Glenn



__________________
glennjanie is offline  
 
Reply With Quote Quick reply to this message
Old 09-14-2007, 08:54 AM  
AS Construction
Junior Member
 
Join Date: Sep 2007
Posts: 3
Default

Are they full plans and specifications for the room additions including foundation, elevations, room layout, and plot plan.

__________________

Allstate Construction
"Home Remodeling Pros"

[URL=http://www.allstateconstruction.net]Home Remodeling Michigan[/URL]

AS Construction is offline  
 
Reply With Quote Quick reply to this message
Old 09-14-2007, 09:59 AM  
Timber Creek
Junior Member
 
Join Date: Sep 2007
Posts: 3
Default Probably right.

I can't speak for Florida, but that is in line with what we are paying locally for similar work. Meeting local government codes in the permit phase can be very expensive. The survey company assumes some liability if they mess up and problems arise later based on property line encroachment, etc. That is likely why they require the boundary check. I would ask them that question specifically if you haven't already.

__________________
Timber Creek is offline  
 
Reply With Quote Quick reply to this message
Old 06-25-2008, 01:06 PM  
jmdrum@bellsouth.net
Junior Member
 
Join Date: Jun 2008
Posts: 1
Default

Code requirements vary greatly by locality; however, your local building inspector"s office can advise you of the specific requirements as well as give you some "unauthorized" indications as to whether the prices you have been quoted are in line with comparable projects in your particular area. Once you get through the prelinaries, www.renovationconsultants.net offers some good FREE advice on avoiding contractor scams.

__________________
jmdrum@bellsouth.net is offline  
 
Reply With Quote Quick reply to this message
Old 06-25-2008, 02:18 PM  
Jaybird VuCE
Jaybird VuCE
 
Join Date: Dec 2006
Posts: 7
Likes Given: 2

Default

The company that is providing the topographic survey does not have to do the boundary survey; however, they are probably trying to protect their company from a lawsuit if something is wrong. As long as the property is marked by valid physical property markers that they can confirm are valid, they should not have to provide the entire boundary survey. They should just need something to tie-in to. You can check the state law by contacting the Bureau of Professional Licenses in Florida to determine if a topographic survey requires a full boundary survey. A topographic survey is one type of survey that does not require a licensed surveyor in some states, however, it usually requires a licensed engineer to seal the drawing. In any case, the rip-off is usually occurring at the municipal level. While the municipality is trying to protect their resident's interest, the business has become such a money maker that they have just become greedy. The permit and inspection fees are usually way out of line with the service provided. The inspector isn't liable for anything they miss and are usually held harmless in court.



__________________
Jaybird VuCE is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Is this a site to join and sell your junk now? wienerwater HouseRepairTalk Website Help 8 02-04-2009 07:36 PM
Tool Site help Needed Relevancy Tools 19 01-16-2008 07:26 PM
House plans site inspectorD General Home Improvement Discussion 0 03-19-2006 06:22 PM
looking for plans for a gazeebo james b General Home Improvement Discussion 3 03-14-2006 05:27 PM