DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Starrett ProSite Protractor 505A-12




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 01-15-2006, 07:42 PM  
Square Eye
Senior Member
 
Square Eye's Avatar
 
Join Date: Jan 2006
Posts: 1,273
Liked 4 Times on 4 Posts

Default Starrett ProSite Protractor 505A-12

If you ever have or ever intend to install crown moulding, you will appreciate this tool. It gives you the actual angle of the corner, inside or outside corner. And, it gives you the miter angle. Just set your mitersaw to the angle and make your cut. No more open miters, no more trying to make that second cut.

http://www.amazon.com/gp/product/B00...lance&n=228013

Recently, I used this to mark my top angle on fascia at the peak of a gable. I have found countless other excuses to get this tool out, you will too. The tool works by swinging the halves of the tool to the positon where the final product will be, right against the walls, the tool is tight enough to keep this setting until you can get a reading.

Very handy,
Tom in KY, angle master. Not compensated nor affiliated with the Starrett company or Amazon.



__________________

Last edited by Square Eye; 01-15-2006 at 07:45 PM.
Square Eye is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On