DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Stuck AND loose - unremovable recessed lights




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 07-07-2009, 11:50 PM  
redpenner
Junior Member
 
Join Date: Jul 2009
Posts: 1
Default Stuck AND loose - unremovable recessed lights

Can anyone suggest a tool or method to remove our burned-out recessed bulbs? Whoever installed them must have used the wrong kind, because they are screwed in so tight that nothing will loosen them, and yet just trying to get a grip has resulted in pushing them up into the ceiling where the "cans" are flopping around loose and can't be unscrewed. We haven't had any luck getting the outer housing ring off, either.

This is my first post so I guess I can't include a picture, but they don't look like proper recessed lights. If you think you can help, I could email you the picture...

Also, what kind of bulb should we replace them with, if we ever manage to get them removed?



__________________
redpenner is offline  
 
Reply With Quote Quick reply to this message
Old 07-08-2009, 08:47 AM  
handyguys
Senior Member
 
handyguys's Avatar
 
Join Date: Feb 2008
Location: USA
Posts: 815
Liked 1 Times on 1 Posts

Send a message via Skype™ to handyguys
Default

Hmmm - Its hard to say what the issue is. If you could figure out the manufacturer and model of the fixture that might help. It could be possible you have a non-standard type socket. Maybe a push in, not screw in, bulb. Or maybe a bulb that only turns 1/4 turn then pulls out. Maybe there are some markings on the bulb you can read too? If you could identify what bulb is in there then we can look it up to see what style base it is.

If its a regular 'edison' base. Thats what the US standard lightbulb base is called. Then just use more force when unscrewing it. Make sure the power is off and you are wearing leather gloves and safety glasses. The bulb could break with the extra force. If it does then you can use some needle nose pliers to grab the esge of the base to continue to unscrew it. Again make sure the power is OFF. Not just the switch, the breaker.

Oh, and remember, lefty loosey, righty tighty.

__________________

The Handyguys Podcast [url]http://www.handyguyspodcast.com[/url]

handyguys is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
lower heat loss recessed lights. coach606 Electrical and Wiring 9 11-28-2012 02:42 PM
Recessed Lights... Jordi88 Electrical and Wiring 12 01-31-2008 07:44 PM
Help finding recessed lights knlsand Electrical and Wiring 29 01-17-2008 05:53 AM
Stuck Deck Door bigw Windows and Doors 6 03-14-2007 10:01 AM
Help plz...kinda stuck here flchoirboy General Home Improvement Discussion 1 12-30-2006 01:03 PM