 |
11-03-2011, 11:26 AM
|
|
|
Member
Join Date: Oct 2011
Posts: 41
|
Studs - wooden or steel
Hello,
My contractor wants to use steel studs for the wall, all around my apartment. I understand that this means we must decide now where we want to hang things on the wall, so that he can put blocking in the relevant places.
I also understand that with wooden studs we don't need the same amount of blocking, presumably because nails can go into the wooden stud if need be.
With the above in mind, why are steel studs used at all? And, is it customary for a contractor to use wooden studs if the customer does not indicate either way?
Thanks!
|
|
|
11-03-2011, 12:19 PM
|
|
|
Senior Member
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,329
Liked 27 Times on 24 Posts Likes Given: 2
|
Most often steel studs are used in commercial work and apartments because they do not burn in a fire.
There's no reason I can think of to use them in a reguler home.
Even if he does use them there's no reason you can not still hang things on the wall. Just use fine thread sheetrock screws.
|
|
|
11-03-2011, 07:22 PM
|
|
|
Moderator
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 1,886
Liked 32 Times on 29 Posts Likes Given: 19
|
steel studs make for a straighter wall as there is no deviation in manufacture as there would be with wooden studs.
|
|
|
11-04-2011, 03:14 AM
|
|
|
Junior Member
Join Date: Nov 2011
Posts: 1
|
I would say that putting up an interior wall with metal studs is just as much work as using conventional wood lumber. By their very nature, metal studs are impervious to fire, termites, rot, splitting, and any other number of hazards which can befall lumber. But constructing walls with metal studs can be more of a pain than it appears at first.
__________________
[URL="http://www.fyurl.com/rr.php?c=2&site=www.houserepairtalk.com&url=http://www.vanbrouck.com/"]lake house plans[/URL] | [URL="http://www.fyurl.com/rr.php?c=2&site=www.houserepairtalk.com&url=http://www.vanbrouck.com/"]mansion design[/URL]
|
|
|
11-05-2011, 10:45 PM
|
|
|
Junior Member
Join Date: Nov 2011
Location: Western Upstate NY, NY
Posts: 6
|
Steel studs are also used for soundproofing too
|
|
|
11-06-2011, 10:37 AM
|
|
|
Member
Join Date: Apr 2010
Location: Lake Wales, Fl.
Posts: 97
|
The main problem with steel is that it is a very good conductor of heat, each stud will present your expensive warm air with an express route out of your home.
Steel is best used where there is at least three inches of polystyrene between it and your warm air.
How are your existing walls constructed?
|
|
|
11-06-2011, 11:46 AM
|
|
|
Senior Member
Join Date: Oct 2011
Location: Lagrangeville, New York
Posts: 392
Liked 3 Times on 3 Posts
|
What's the age of the apartment? Is this just one room
How many apartments are in the section
Since this is a apartment is there a super involved in this decision?
This would be silly to do if your not the only apartment
More info on your apartment please
|
|
|
11-09-2011, 07:52 PM
|
|
|
Member
Join Date: Oct 2011
Posts: 41
|
Answers
Hey, thanks for your answers.
The only pre-existing walls are the exterior walls, and these are brick - almost 100 years old. Some inner walls between bedroom + closet and remaining space, nothing more.
As far as layout, this is a ~900sqft, with one large open space (incl kitchen, dining, living, hallway), one bathroom, and one bedroom. Hope this helps.
I inquired my contractor about heat conductivity and he says he will have additional layers on top of the steel studs, making heat conduction a non-issue.
|
|
|
11-09-2011, 08:58 PM
|
|
|
Senior Member
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 5,044
Liked 236 Times on 219 Posts Likes Given: 394
|
Just go with witch ever he offers cheapest.
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|