DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > treated plywood





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 09-25-2009, 11:44 AM  
wart
Junior Member
 
Join Date: Sep 2009
Posts: 2
Default treated plywood

I am planning to build a skirt/ snow shovel protection base on part of my dome near my door ( using 6 ft. long X 3 ft. high x 3/8 in. thick treated plywood) and 6 inches of the plywood will be below grade in gravel near a plastic drainage tile. It may still get wet and snow will pile against it at times.

I have read, in a boating forum, re getting the plywood dry before applying paint or preservative.

What green alternatives do i have re paint or preservative for longest life???

I have to paint the outside facing side.

Thanks.



__________________
wart is offline  
 
Reply With Quote Quick reply to this message
Old 09-25-2009, 09:12 PM  
Nestor_Kelebay
Emperor Penguin
 
Nestor_Kelebay's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, Manitoba
Posts: 1,844
Liked 2 Times on 2 Posts

Default

Unfortunately, most things that prevent Nature from running it's course (like preventing wood in the ground from rotting) aren't really very eco-friendly themselves.

About the most rot resistant plywood you're likely to find is called "PWF" plywood, and it's meant for Permanent Wood Foundations on houses. That is, instead of the house having concrete basement walls, it has wooden basement walls made with PWF plywood.

PWF plywood is considerably more heavily treated than the standard pressure treated lumber of plywood available for above ground use.

If you cut the plywood, be advised that the exposed wood is NOT treated and will rot. So, plan your work so that the factory treated edge goes into the ground. The exposed cut edge can be treated with an end cut preservative.

You should also be aware that various copper naphthenate wood preservatives and end cut preservatives will have varying levels of the active ingredient copper naphthenate in them. The highest I've ever found is 8.0 percent copper naphthenate in Copper II Green from Recochem, but if you Google "8% Copper Naphthenate" you'll find a lot of wood preservatives with that level of copper naphthenate in them.

This PDF file compares the effectiveness of various wood preservatives in prevention Southern Yellow Pine sapwood from rotting when buried in the ground:

http://www.coppercarewoodpreservatives.com/Reports/cu-nap%20conc%20flyer.pdf

__________________

Last edited by Nestor_Kelebay; 09-25-2009 at 09:24 PM.
Nestor_Kelebay is offline  
 
Reply With Quote Quick reply to this message
Old 09-26-2009, 05:24 AM  
wart
Junior Member
 
Join Date: Sep 2009
Posts: 2
Default thanks

Thanks.

I already have the have regular wolmanized plywood & will paint it & drain the area near the board as well as possible.

__________________
wart is offline  
 
Reply With Quote Quick reply to this message
Reply


Tags
pressure treated plywood, soil

Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Using pressure treated lumber for termites? Bgrae001 Framing and Foundation 4 03-07-2009 07:15 AM
Waiting on treated wood to dry? blburson Carpentry and Woodworking 3 02-20-2009 11:59 AM
Painting Treated Lumber kok328 Painting Forum 5 10-01-2008 06:20 PM
Pressure Treated? Rincon General Home Improvement Discussion 2 07-07-2008 09:22 AM
Predrilling into pressure treated wood. Engineering help ElevatedDeck General Home Improvement Discussion 3 03-23-2008 06:55 AM