DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > Wide Flange Beam in Basement




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 03-14-2013, 02:22 PM  
rcahoy
Junior Member
 
Join Date: Mar 2013
Posts: 2
Default Wide Flange Beam in Basement

Hi All,

I am new to this forum, but am looking for a path of guidance...

I am currently finishing my basement and as a part of this renovation I planned to remove a 18' section of load bearing wall to open up the recreation area. I even hired a structural engineer to provide some guidance and wide flange beam sizing and footing requirement so I could appease the city in that, indeed, I knew what I was doing and am going to do it the right way.

However, as I started to move forward with getting the beam purchased, I noticed that the engineer spec'd a beam that was a bit too deep for what I wanted...W12X30. So, I called up the firm and to my dismay, the engineer passed away and it was a one man operation! So, one, I can call up another engineering firm and deposit another 250 bucks or more, or two...I have all the engineering documentation with loads, etc.

What I would like is to get a W10X? beam in there to save a couple inches of space (I know this will be a heavier beam). Does anyone have any ideas other than hiring another firm? Also, there was no nailer plate specified in the design to sit on the top flange of the beam which would be great as that would save another 1.5 of headspace. Is a nailer plate truely required for lateral support (I would have engineered wood joists resting direct on the top flange of the beam)? One side of the beam will be located on the foundation (new beam pocket) and the other I would have a column with footing, spanning the full 18' (17'8" to be exact)

Any guidance is greatly appreciated!

Ryan



__________________
rcahoy is offline  
 
Reply With Quote Quick reply to this message
Old 03-14-2013, 03:25 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 9,766
Liked 802 Times on 715 Posts
Likes Given: 1362

Default

Any changes now, the city will ask for new documents. Your best bet would be to talk to the steel suppiers for their suggestion on a different beam with the same span strength and get something in writing and take that to the city and see if they will accept the change. You could go up and hang the joist off the beem. You would fill the flange area with wood bolted in place and use the correct hangers for that. The city should have no problem with that and may help you figure out what needs to be done.
And welcome to the site.



__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Old 03-17-2013, 12:01 AM  
AndyGump
Drawer of Homes
 
AndyGump's Avatar
 
Join Date: Mar 2011
Location: Orange, CA.
Posts: 56
Liked 5 Times on 3 Posts
Likes Given: 2

Default

$250.00!? Seriously?

Great price for what an engineer does in my opinion.

Hire another and ask him/her if it would be possible to spec a tube with bolts welded to either side to accept a ledger board that you could then attach joists via joist hangers to.
Or some other possible scenario to help the head height situation.

Andy.

__________________
AndyGump is offline  
 
Reply With Quote Quick reply to this message
Old 03-27-2013, 06:20 PM  
rcahoy
Junior Member
 
Join Date: Mar 2013
Posts: 2
Default

Thanks all for you input. I ended up finding a guy to resize the beam for me that I happened to go to college with! Except now the beam weights about 300 pounds more to gain another 2" of headroom... Thanks again!

__________________
rcahoy is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Central basement support beam Dionysia Framing and Foundation 19 01-16-2012 04:49 AM
Basement Main Beam Replacement johnbaum Framing and Foundation 30 01-12-2012 03:31 PM
Double wide with a leak ironhat Roofing and Siding 5 05-31-2009 07:59 AM
re-sell value of double wide Rae05 General Home Improvement Discussion 3 02-20-2009 07:31 AM
Adding support beam in basement Jschoppe Framing and Foundation 2 01-14-2009 12:07 PM