DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Carpentry and Woodworking > Adding trim to basement "ledge"...




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 01-18-2009, 05:15 PM  
arborpark
Junior Member
 
Join Date: Jan 2009
Posts: 1
Default Adding trim to basement "ledge"...

Hello,

We have a bi-level home and the rooms in the basement have a 6" ledge that comes in around the outside of the home.

Some homes in our area place wood trim on this ledge, creating a nice wall-long shelf - does this have a name?

I'm having trouble finding information on completing this project myself or finding any examples online...

Thanks in advance for any help or ideas!



__________________
arborpark is offline  
 
Reply With Quote Quick reply to this message
Old 04-28-2009, 01:17 PM  
Bronco 2
Junior Member
 
Join Date: Apr 2009
Posts: 1
Default

I think that it is just called a ledge. You can use whatever you want on the ledge, Reason for the wood is that it is harder than drywall so you wont be constantly mudding dents in your ledge, and drywall is what most contractors will put on top of the ledge because it saves them time.



__________________
Bronco 2 is offline  
 
Reply With Quote Quick reply to this message
Old 04-28-2009, 02:00 PM  
handyguys
Senior Member
 
handyguys's Avatar
 
Join Date: Feb 2008
Location: USA
Posts: 815
Liked 1 Times on 1 Posts

Send a message via Skype™ to handyguys
Default

Wood is also better if you want to put drinks or plants on it. The simplest form would be a board attached to top. I would round over the edge and put some trim, maybe char rail, casing or quarter round under the edge to dress it up. Polyurathane if natural wood, semi gloss or gloss paint if painted to allow for easy cleaning.

let me know if you need a picture. I have a half wall that I did this to and the technique is similar.

__________________

The Handyguys Podcast [url]http://www.handyguyspodcast.com[/url]

handyguys is offline  
 
Reply With Quote Quick reply to this message
Old 04-29-2009, 11:13 PM  
Nestor_Kelebay
Emperor Penguin
 
Nestor_Kelebay's Avatar
 
Join Date: Mar 2009
Location: Winnipeg, Manitoba
Posts: 1,844
Liked 2 Times on 2 Posts

Default

I'd never put real plants on real wood unless you know how to remove something called "iron gall ink" stains from wood. Generally a yellowy or reddish colour most often indicates the wood has a lot of tannin in it, like cedar, redwood, red oak, Douglas fir, southern yellow pine, etc. Putting a real plant on a high tannin wood is courting disaster.

The reason why is that if you overwater the plant, and any water drips out of that pot, it won't be distilled water. It'll have iron ions in it from passing through the soil, and the iron ions in that water will react with the tannin (also called "tannic acid") in the wood to form something called "iron tannates" which when dissolved in water form "iron gall ink" which was commonly used from the beginning of the middle ages (1100ish) until the 1800's.

http://en.wikipedia.org/wiki/Iron_gall_ink

Iron gall ink will penetrate into wood just like a wood stain, and bleach won't remove it, only lighten it to some degree. You can only remove it using acid. A dilute solution (about 3% concentration) of either phosphoric acid or oxalic acid will dissolve the iron tannates and leave behind colourless iron salts, thereby removing the stain. You can find phosphoric acid in the cleaning aisle of any home center as it's commonly used as the active ingredient in bathroom cleaners and toilet bowl cleaners because it cuts through soap scum without attacking chrome. Oxalic acid is typically sold as "wood bleach" and is used to remove the gray discolouration that occurs on wood exposed to the elements. Oxalic acid is therefore used to clean up old wood that's been stored outdoors prior to using it in an application where you want the wood to look unweathered, and any hardware store that caters to woodworkers should sell it.

The problem of iron staining on high tannin woods is so pervasive that even wood transported on railway cars can often be stained. Tiny iron particles that come off the steel wheels of the rail cars or the steel rails they roll on can land on wet wood and result in discolourations due to iron tannates forming ink and being absorbed into the wood.

http://web.archive.org/web/20060423125820/www.durable-wood.com/pdfs/discolor_eng.1oct02.pdf

There's been more red oak hardwood floors ruined by overwatered plants than any one other cause, and in most cases the stains on those floors were never removed because the home owners only tried bleach (unsuccessfully) in an attempt to remove the stains.

If you're going to put real plants on those ledges, either don't use real wood or let the plants die of thirst. Truthfully, the real solution is to use a wood with a very low tannin content, but I simply don't know which woods those are. That's because it's the tannins in the high tannin woods that cause all the problems. So, you hear about the problems that tannins cause in high tannin woods, but nothing about low tannin woods where there are no problems.

If it was me, I would probably install flourescent or recessed lighting on top of those ledges so the light reflected off the walls and ceiling and illuminated the whole room. Install glass or strong plastic covers over fluorescent light fixtures or install recessed lighting in laminated particle board boxes, and then you can put whatever you want on top.

Just a thought. Occasionally I think.

__________________

Last edited by Nestor_Kelebay; 04-30-2009 at 10:05 PM.
Nestor_Kelebay is offline  
 
Reply With Quote Quick reply to this message
Old 05-01-2009, 04:31 AM  
locknut
Member
 
Join Date: Apr 2009
Posts: 75
Default

My house also has that ledge. When I paneled the basement I simply covered it as described above and finished it with with the same panel material along its length. Along where it meets the wall, above and below, there are molding strips to hide the joints. The ledge is highly useful as its a handy place for radios, picture frames, and other miscellanea. I also installed electrical outlets above and below along its length. The ledge adds both character and utility to its environment.

__________________
locknut is offline  
 
Reply With Quote Quick reply to this message
Old 05-01-2009, 04:20 PM  
GBR
Senior Member
 
Join Date: Mar 2009
Posts: 337
Liked 18 Times on 17 Posts
Likes Given: 9

Default

Hopefully, they capped it by now, 3-1/2 months later. Be safe, G



__________________
GBR is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Adding support beam in basement Jschoppe Framing and Foundation 2 01-14-2009 12:07 PM
Getting basement air into the return? Quattro HVAC 8 01-10-2008 07:51 AM
Adding a Bathroom in basement with septic system Nuggethead 420 General Home Improvement Discussion 4 07-31-2007 07:59 AM
Adding a basement bedroom JoulesWinfield Framing and Foundation 20 01-25-2007 07:32 AM
Adding a basement bedroom JoulesWinfield HVAC 9 01-02-2007 12:20 PM