DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   Carpentry and Woodworking (http://www.houserepairtalk.com/f6/)
-   -   Looking for new Bandsaw (http://www.houserepairtalk.com/f6/looking-new-bandsaw-15642/)

jmc0319 02-27-2013 03:27 PM

Looking for new Bandsaw
 
I am in the market for a bandsaw. I am gravitating toward a Grizzly. Anyone have an opinion on them versus other suggestions?

nealtw 02-27-2013 04:24 PM

It looks like the motor is bolted into the frame, that the only thing I can see that I don't like.
Bands saws will walk across the room with vibration, so you want heaver one.
Saws with outside varible pully size can be slowed down to cut steel, with the right blade.
Some come with a an optional 6" extention for the frame to allow up to a 12" deep cut
A bolt on motor can be replaced by anybodys motor saving money down the road, and if your like me and rip down 10x10 beams you will burn out motors.
Haven't seen one that the dust collector works on. I cut the bottom out of the lower cover to let the sawdust fall into a bucket, had to move the motor to the side.
Don't buy the extra rip fence they want to sell, just bolt a board to the one that came with the saw.
I bought 2 circle cutting jigs before I gave up and built one that actually worked.
I hope some of that helps.

jmc0319 02-27-2013 05:27 PM

Yes thanks Neal. As always very helpful. What would you call "heavy"?

nealtw 02-27-2013 06:52 PM

The heavy one tell you their weight and the others leave that out. Look at the shape of the table too. If you are fighting with a heavy chunk of wood, you don't need this thing falling over on it back. If you get one that has metal blade guide, just change them out for iron wood, works great.

elbo 03-02-2013 01:44 PM

I got the 14 inch grizzly mod.# GO555LX about 3 months agofound it to be well made and needed no adjustment right out of the box. . I made my own dust collector out of a piece of 4 inch thin wall pvc pipe and reduced it down to where it fit my vacuum hose, it works OK , kind of, but I find it just as easy to open the bottom door and vacuum out the dust, less noise to contend with with noy having a vacuum blasting in my ears all the time when using the saw.
The fence and miter gauge are a little cheesy and I dont use the miter gauge much, I use instead the one from my table saw. The fence is cheap but when I use it when resawing it tracks perfect
All in all, I like the saw

jmc0319 03-02-2013 04:14 PM

Thanks Elbo

jmc0319 03-04-2013 09:02 AM

Just to close the lop on this thread, I just ordered the Grizzly G0555P 14". Will let you all know how it is. Thanks for everyone's input.

nealtw 03-04-2013 02:16 PM

A bandsaw is a pretty big step for a home workshop, what are you planning on doing with it?

jmc0319 03-04-2013 02:23 PM

Neal - in my shop I have a miter saw, table saw, router table and a bunch of hand power tools. Honestly I have done a lot of work around my farm more in the way of maintenance and building coops/barn shelters etc. I always wanted to get into making small jewelry boxes etc etc that my wife and four children might like as gifts/keep sakes (of course thats if I do a decent job on them). I think a band saw will give me the ability to make these. Things like simple band saw boxes is where I will start. In addition, over the course of the last 6 months or so I have been very conscious when in my shop about whether what I was doing with my tools would be better done with a band saw. I was surprised at how many times I said yes it would. Hope this makes sense.

nealtw 03-04-2013 04:31 PM

I understand bandsaw boxes, simple dosn't come to mind. You will have to keep the saw really tuned up to run the tiny blade. You can get a 1/8" blade but they are a bear to keep running good. I've had better luck with blades from tool stores that they weld for you. The factory ones never seem to be welded straight enough. Next you will be in the market for a tape sander.


All times are GMT -6. The time now is 02:31 AM.