DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (http://www.houserepairtalk.com/forum.php)
-   Carpentry and Woodworking (http://www.houserepairtalk.com/f6/)
-   -   Pre Drilled Melamine 24" width? (http://www.houserepairtalk.com/f6/pre-drilled-melamine-24-width-10794/)

3gmp 02-14-2011 07:48 AM

Pre Drilled Melamine 24" width?
 
We will be building some shelving in a storage area. We found melamine panels at HD with holes predrilled for shelf pegs. However we would like to make 24" wide shelves, and the melamine is about 16" wide.

Does anyone where we could find this product in the desired 24" desired width?

joecaption 02-14-2011 09:46 AM

You would be far better off using 3/4 A/C Plywood then that junk.
It does not hold screws or nails, will wick up moisture from the floor, and has very little loading strength.
With 3/4 plywood and plywood shelves you could add 1 X 4" strips of wood to set the shelves on and add another piece across the front under the shelf to stop the shelf to stop it from sagging.
With Melamine shelving it will start to sag as soon as you set anything on it.
Lowes or HD can cut the plywood to size before you leave the store. I would prime and paint with enamel paint before assembling it.


All times are GMT -6. The time now is 04:03 PM.