DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Carpentry and Woodworking > Removing Staircase from Abandoned Victorian House




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 11-09-2010, 11:52 PM  
1victorianfarmhouse
Senior Member
 
Join Date: Feb 2010
Posts: 150
Liked 9 Times on 5 Posts

Default Removing Staircase from Abandoned Victorian House

Not too far from me is a Victorian farmhouse on a plot that was bought by a developer and development never happened. The house has been abandoned for many years and is beyond repair, but still has many good sections and parts in it. I've talked to some people from the developer and they say help yourself to whatever I want. I think they would be really happy if the place sort of leveled itself and disappeared so they don't have to consider demolition costs.

I am interested in taking out an entire interior staircase; one side is against the interior of an outer wall, the other is part of an interior wall. Trying to disassemble it piece by piece doesn't seem like it would be a viable option.

The stairway would be used to go to my attic. It is exactly the right size, and almost an exact match to my existing back staircase (about the same age).

I would think I'm nuts, but two other people, when I mentioned finishing my attic, both suggested I look for a staircase out of an existing house.

Comments on how to best do this are appreciated.

Thanks as always,

vince



__________________
1victorianfarmhouse is offline  
 
Reply With Quote Quick reply to this message
Old 11-11-2010, 06:12 PM  
DrHicks
Big Hog
 
Join Date: Oct 2010
Location: Omaha, NE
Posts: 102
Liked 1 Times on 1 Posts

Default

Without looking at it, I wouldn't have a clue. But I do congratulate you, and feel just a bit envious of your find!

Are you going to strip woodwork, trim, etc?


I'm thinking that a good cordless Sawzall will be your friend, as well as some pry-bars, etc. Beyond that, I really have no idea.

Good luck!



__________________
DrHicks is offline  
 
Reply With Quote Quick reply to this message
Old 11-11-2010, 08:03 PM  
GBR
Senior Member
 
Join Date: Mar 2009
Posts: 337
Liked 18 Times on 17 Posts
Likes Given: 9

Default

You will probably need a permit for your replacement stairs to the attic. Make sure it fits exactly, total rise/run, etc. The risers and treads need to meet today's Codes for egress. It will be part of the package permit you get for the attic finishing to protect yourself with a paper trail when you sell and any H.O.Insurance claims filed while you live there, meeting minimum safety Code. Powered by Google Docs

Gary

__________________
GBR is offline  
 
Reply With Quote Quick reply to this message
Old 11-11-2010, 10:18 PM  
1victorianfarmhouse
Senior Member
 
Join Date: Feb 2010
Posts: 150
Liked 9 Times on 5 Posts

Default

When I didn't see any replies, I realized that this might be kind of a tough thing for even the pros to do. The only way I could think of doing it (and I haven't been able to look at the underside yet) would be to literally cut the darn stairway out, and that might not be as easy as it sounds. If the weather holds this weekend, I'm going to try to take a look at it from the underside and see how it is put together (I have a very good idea after doing some googling and looking at my staircases). I think pretty much the only way to take it out is really piece by piece.

I have already taken some of the leftover trim out, but it splits very easily and is held in with 2" long nails, requiring more effort to get them out. And it's covered with several layers of paint. I already took all the undamaged doors, but really have no use for them. But at least they won't get bulldozed away.

I am also planning to take out the wooden floorboards to use in my attic. They are pretty much the same as what my house has, even painted the same mustard yellow long ago, though most of my floors have been given a more decorative oak/birch wood flooring on top of the original floorboards.

Regarding code....my house is 115 years old, and there has been work done originally and previously years ago that doesn't meet TODAY'S code, so this may open a can of worms. And I don't know what permits may have been applied for in the past. Let me make it clear that I am all for codes especially for electric, plumbing, etc, but also like to stay true to a house's historic character. I don't plan on selling for many, many years.

Thanks!

vince

__________________
1victorianfarmhouse is offline  
 
Reply With Quote Quick reply to this message
Old 11-12-2010, 02:04 PM  
Allison1888
Junior Member
 
Join Date: Jul 2010
Posts: 12
Default staircase

I also applaud your efforts. Do take some video and pictures, as this will be one great story to show when it's all done. In terms of the permits, I'm sure the code is different today in terms of the staircase run, so you may be better off not opening that door!

__________________
Allison1888 is offline  
 
Reply With Quote Quick reply to this message
Old 11-13-2010, 10:35 PM  
1victorianfarmhouse
Senior Member
 
Join Date: Feb 2010
Posts: 150
Liked 9 Times on 5 Posts

Default

I took a closer look at the stairways in the house today, and it's pretty obvious that it will not be easy to access the staircases from below. There are load bearing walls under some areas, and the only areas that might have clear access once I remove the plaster and lath would require a ladder to reach, and even then, I might have to remove some wooden shelving to get clear access.

Over the next couple of weeks as time allows, I'm going to remove some flooring and see how/if I might be able to disassemble the stairs and remove them piece by piece.

I've tried to post some pictures as well.

3-21-10-pics-003.jpg   10-2-10-pics-007.jpg   10-2-10-pics-011.jpg  
__________________
1victorianfarmhouse is offline  
 
Reply With Quote Quick reply to this message
Old 11-14-2010, 04:14 AM  
oldognewtrick
Moderator
HRT_MODERATOR.png
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 5,413
Liked 459 Times on 382 Posts
Likes Given: 146

Default

Vince, from looking at the pics I would recommend taking them out piece by piece, the same way it was installed. If you try to take it out as a unit you are going to have several hundred pounds that are wanting to fall on your head. The stringers are probably nailed in places you never thought a nail would be and the logistics of moving it safely will be a task in and of itself. I applaud your efforts but want you to be safe, first and foremost.

I'm sure it can be removed intack but you are going to need a lot of help and equipement to do it.

__________________
oldognewtrick is offline  
 
Reply With Quote Quick reply to this message
Old 11-14-2010, 06:29 AM  
DrHicks
Big Hog
 
Join Date: Oct 2010
Location: Omaha, NE
Posts: 102
Liked 1 Times on 1 Posts

Default

After seeing the picture, I'd have to second what OldDog said. It was undoubtedly installed piece-by-piece, and will have to come out that way too.

Good luck & play safe!

__________________
DrHicks is offline  
 
Reply With Quote Quick reply to this message
Old 11-14-2010, 07:36 PM  
gmicken
Member
 
Join Date: Nov 2010
Location: Chestertown, Maryland
Posts: 44
Default

Are your steps just one floor? I have removed old stairs in the past and the two story and three story are not something one person can do easily. The best thig to do is build a temporary wall under the stairs to support the weight. One floor with a 90 degree turn at the top will be heavy enough for 5 men. Go into the attic and put a 6x6 across the celing joists and use a chain fall to lower the stairs to the floor. Take a battery Reciprocating saw and cut the existing studs after you put supports to hold the walls that are cut. If you are getting the steps to save money. Go to your local lumber yard and order steps that are made to fit your floor to floor measurement. This will be alot cheaper. The floor that you pull out will pay for the stairs. I just bought old floor at $1.75 per sq ft. Good luck.

__________________
gmicken is offline  
 
Reply With Quote Quick reply to this message
Old 11-14-2010, 08:54 PM  
1victorianfarmhouse
Senior Member
 
Join Date: Feb 2010
Posts: 150
Liked 9 Times on 5 Posts

Default

Thanks for all the replies. I'll admit that I had a lot of ideas rolling around in my head, including using hydraulic jacks, chainsaws, come alongs and snatch blocks, but the tough part is also access to the stairway and house due to trees on the sides. The roof and ceiling very close by is shot and much of the wood up there is rotten and wet, making it tough to anchor anything overhead. Getting it out once taken down isn't hard, but accessing it would be tough and time consuming.

While saving money is part of the reason, I also like to reuse materials where I can, especially where they are the right size and are historically correct.

I'll have more time on Thanksgiving weekend, and will take another look at it in detail just to see how it's built. Then I'll check with my local lumberyard.

vince



__________________
1victorianfarmhouse is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Identifying Wood Floors in Victorian House 1victorianfarmhouse Flooring 7 10-20-2010 05:27 PM
What is the technical name for the horizontal piece of trim on a Victorian home? IHATERUST Carpentry and Woodworking 1 04-30-2010 05:53 PM
staircase problem. hunter41162 Carpentry and Woodworking 4 03-09-2010 08:40 PM
How to fill an abandoned drain Kelly M Bray Plumbing Forum 6 10-06-2009 08:47 PM
Removing a cement step on outside of house Vikeologist Bricks, Masonry and Concrete 1 06-17-2009 09:05 PM