DIY Home Improvement, Remodeling & Repair Forum > Appliances > HVAC > evaporator motor




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 03-10-2007, 02:47 PM  
dean28
Junior Member
 
Join Date: Mar 2007
Posts: 4
Default evaporator motor

I need to get to the bottom motor on a moble home Insider.The unit has to be pulled out of the closet to get access to the lower motor.is the panel on the right side or the left side? If it's on the left side I can cut the wall and put a grill over it.



__________________
dean28 is offline  
 
Reply With Quote Quick reply to this message
Old 03-11-2007, 11:30 AM  
glennjanie
Senior Member
 
Join Date: Mar 2006
Posts: 2,990
Liked 2 Times on 2 Posts

Send a message via AIM to glennjanie
Default

Hey Dean:
If we are talking about a furnace here they usually have from 2 to 4 panels on the front that lift up and pull off; sometimes they have screws in them. With the bottom panel off your fan assembly should slide out on tracks. I would not cut the wall until I could see for sure the access was on that side.
If you would include brand, model, serial and maybe some pictues then Jeff1 could solve your problem. The guy is amazing.
Glenn



__________________
glennjanie is offline  
 
Reply With Quote Quick reply to this message
Old 03-11-2007, 01:28 PM  
dean28
Junior Member
 
Join Date: Mar 2007
Posts: 4
Default

this is a self contained heat pump,in a moble home.I have to replace the motor tomarow,and I was hoping to get some pointers.I haven't worked on one of these yet,

__________________
dean28 is offline  
 
Reply With Quote Quick reply to this message
Old 03-11-2007, 09:29 PM  
glennjanie
Senior Member
 
Join Date: Mar 2006
Posts: 2,990
Liked 2 Times on 2 Posts

Send a message via AIM to glennjanie
Default

I also have a self contained heat pump (geo-thermal) but my fan motor in in the top; the comperssor is in the bottom. Evidently mine is not like yours. Perhaps some pictures would help.
Glenn

__________________
glennjanie is offline  
 
Reply With Quote Quick reply to this message
Old 03-12-2007, 07:35 PM  
dean28
Junior Member
 
Join Date: Mar 2007
Posts: 4
Default

I pulled the unit out today.both panels right and left have to be taken off to change the blower motor.A hole in the wall wouln't have worked,the panels are the full length and width of the unit.It's called "The Insider"And is manufactured in Kentucky.

__________________
dean28 is offline  
 
Reply With Quote Quick reply to this message
Old 03-12-2007, 10:14 PM  
glennjanie
Senior Member
 
Join Date: Mar 2006
Posts: 2,990
Liked 2 Times on 2 Posts

Send a message via AIM to glennjanie
Default

Sorry, I'm not familiar with the brand but the location of manufacturer could be your problem. LOL
Glenn



__________________
glennjanie is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On