DIY Home Improvement, Remodeling & Repair Forum > Appliances > HVAC > Heat Pump Compressor: Bad Run cap and start assist





Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 03-04-2013, 07:53 AM  
y2k600f4
Junior Member
 
Join Date: Mar 2013
Posts: 1
Default Heat Pump Compressor: Bad Run cap and start assist

Hello,

I was hoping someone could provide some insight. I noticed yesterday that my outside unit (both compressor and fan) were not working. Breaker was tripped...heat was working of aux ht (coils) which will run up my electric bill.

I was trouble shooting and I turned on the breaker and blew the start assist device on the compressor (PTCR: Positive Coef Resistor Goddman B11416-70 (-71 replacment)). I removed it form the circuit hoping that the 45uf run cap for the compressor would be sufficient for starting; the fan worked fine but the compressor was not starting.

I removed the run cap (45/5) and checked the caps (fan was fine a t ~5 uf; compressor cap 0 uf: open circiuit; that explains why the compressor was not running without the PTCR !

Just purchased a replacement PTCR and a run cap from my local HVAC supplier (PTCR is expensive). My question is what could of caused my problem ? My guess is that the compressor run cap shorted throwing the breaker. Upon turning on the breaker it both blew the PTCR and the compressor cap (now open circuit). I probably should test the resistance of the compressor winding ? Thanks in advance.



__________________

Last edited by y2k600f4; 03-04-2013 at 09:33 AM.
y2k600f4 is offline  
 
Reply With Quote Quick reply to this message
Old 03-05-2013, 07:19 PM  
keepinitcool
Junior Member
 
Join Date: Jan 2013
Posts: 27
Liked 9 Times on 7 Posts
Likes Given: 6

Default

Hi y2k600f4,

Definetely test the resistance of the compressor windings (test each terminal to ground, test terminal to terminal, etc.). Also check your wiring over to make sure nothing rubbed through and came in contact with the heat pump cabinet. Also possible a couple wires came in contact with one another that shouldnt have. Ohm out everything you can. Just a few things to check before throwing the new (expensive) parts in and having the same problem occur.

__________________
keepinitcool is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Lennox 10ACC−036 compressor fan won't start on its own TGrayson HVAC 11 08-25-2012 11:38 AM
HVAC won't start for AC unless I turn heat on first? Board going out? ACardAttack HVAC 1 07-27-2012 07:06 AM
Heat Pump Aux. heat running too often. OIIIIIIIO HVAC 13 02-26-2012 09:13 PM
Heat pump doesn't start Raindem HVAC 5 12-24-2010 05:59 AM
Coleman Heat Pump compressor not starting sciroccin HVAC 1 04-14-2006 06:08 AM