DIY Home Improvement, Remodeling & Repair Forum > Appliances > HVAC > Help replacing a condensor motor.




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 03-30-2010, 06:25 PM  
Bryan330
Junior Member
 
Join Date: Mar 2010
Posts: 2
Default Help replacing a condensor motor.

Spent most of the day not only searching for help doing this myself but also a friendly place to simply ask this question.

First, I'm broke with an expensive 2 month daughter. If I could afford a trip charge and labor I'd gladly pay for it. Alas, I cannot. So again here I am asking for assistance.

I have a Tappan 13 seer unit, model FS3BD-036K.

The condenser fan motor is locked up. It was an Emerson 1/4hp 825rpm 1.5a unit. I can provide any further details if needed. It has 3 wires: black, orange and blue.

Here is the wiring diagram for the original part.



After a trip to a supply store they sold me a Partners Choice 01-0166 universal fan motor. Included was a capacitor. The specs on the cap. are the same as what is installed but it is about 1/3 of the physical size.

Here is the wiring diagram from the side of the new part.



I need help figuring out what wire goes where, obviously. Installing the motor to the fan and shroud I got, but not the electrical.

If anymore information is needed I can provide it, and if this is the wrong place to ask for this kind of help I apologize.

Thanks,

Bryan



__________________
Bryan330 is offline  
 
Reply With Quote Quick reply to this message
Old 03-31-2010, 07:48 AM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,195
Liked 110 Times on 96 Posts
Likes Given: 64

Default

How many wires are on the new motor and what are their colors?

__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Old 03-31-2010, 02:00 PM  
Bryan330
Junior Member
 
Join Date: Mar 2010
Posts: 2
Default

There are 5.

Brown
Brown/White
Green ground
Black
Yellow

There are 4 more but they are just to change the rotation of the shaft.

I've been told elsewhere to obviously ground the green wire.

Black from the motor to the black at the contactor.
Yellow from the motor to the "C" post on the dual capacitor where the original orange wire went.
The two brown wires connect to the left and right side of the new capacitor, which side isn't important.

This is what I'm about to step outside and try.

__________________
Bryan330 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Lennox A/C condensor fan motor GWS HVAC 23 07-18-2012 11:33 AM
Replacing the entire base of a roof versus replacing parts of the roof jigsawsaver Roofing and Siding 3 07-04-2009 06:04 AM
Lennox Condensor BWonsch HVAC 1 07-01-2009 10:29 AM
replacing fan motor chriswall HVAC 1 06-24-2009 09:10 PM
Replacing a GE Blower motor - any others fit? blackdmd HVAC 1 04-27-2009 04:27 PM