DIY Home Improvement, Remodeling & Repair Forum > Appliances > HVAC > Lennox 50/7.5 capacitor question




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 07-14-2010, 08:40 AM  
suzy
Junior Member
 
Join Date: Jul 2010
Posts: 2
Default Lennox 50/7.5 capacitor question

Repairman replace the outside Lennox 50/7.5 capacitor with a 50/5.0 one as well as the fan motor. The old capacitor registered 4.8, is this 5.0 really enough for this unit? Repairman says it is.



__________________
suzy is offline  
 
Reply With Quote Quick reply to this message
Old 07-14-2010, 11:23 AM  
lloyd
Junior Member
 
Join Date: Jul 2010
Location: Tulsa, Ok
Posts: 28
Default

Though I'd prefer to have the proper mf, It will probably work just fine. You didn't say what size unit or hp of fan you have. Sounds a little larger...4-5 ton?

lloyd



__________________
lloyd is offline  
 
Reply With Quote Quick reply to this message
Old 07-14-2010, 12:22 PM  
Wuzzat?
Banned
 
Join Date: Jan 2010
Posts: 2,328
Liked 167 Times on 154 Posts
Likes Given: 94

Default

Quote:
Originally Posted by suzy View Post
50/7.5 capacitor with a 50/5.0 one as well as the fan motor.
The old capacitor registered 4.8,
is this 5.0 really enough for this unit?
It becomes a question of likelihoods. The guy might have gotten lucky.
If the 7.5 had a tolerance of +/- 50%, the value can be between 3.8 uF and 11 uF 95% or 99% of the time, depending on the quality control of the capacitor manuf.

Probably 4.8 uF does not work if his diagnosis was correct. Without looking up the Normal Distribution curve and all that
http://en.wikipedia.org/wiki/Normal_distribution
about 1/6th of the 5 uF caps that he picks at random will work in this application.

When you add in that the 5 uF also has a tolerance, this 1/6th becomes less.

He might have gotten lucky. And if that cap drifts off of 5 uF in the wrong direction it will fail sooner than one whose value is centered on 7.5 uF.

It was probably late in the day or he was tired.




On second thought -
In a way, there is a contradiction here. If the design center value is 7.5 uF and he declares 4.8 uF to be unacceptably out of tolerance then he should not turn around and replace the 4.8 with a 5.0. He might as well have left the 4.8 in place.

So my first objection was on the grounds of bad practice, and my second is that he is contradicting himself. I hope you at least got a good price.
__________________

Last edited by Wuzzat?; 07-14-2010 at 12:41 PM.
Wuzzat? is offline  
 
Reply With Quote Quick reply to this message
Old 07-14-2010, 03:37 PM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,200
Liked 113 Times on 98 Posts
Likes Given: 65

Default

It depends on what the cap requirements for the new motor are and it could be that the old motor was still good and just had a bad cap.
However, on most residential systems, the fan motor will come on just as soon as the compressor does so the cap requirements for the fan/compressor combination must be accounted for otherwise there's a good chance you'll burn up one or the other (fan or compressor) in the long run.

__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Lennox AC Compressor Problems -- Capacitor? SomewhatHandy HVAC 8 01-19-2013 03:40 AM
Power Saver Capacitor locknut Electrical and Wiring 10 05-08-2012 10:50 AM
Multiple Capacitor Burnouts MikeC. HVAC 2 08-03-2009 08:18 PM
Just replaced capacitor but air not cold anymore traynor HVAC 3 08-06-2008 10:17 PM
Lennox capacitor Betty HVAC 4 06-02-2008 04:56 PM