Go Back   DIY Home Improvement, Remodeling & Repair Forum > Appliances > HVAC

Home DIY Remodeling Rennovation Repair Forum

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 02-25-2007, 03:52 PM   #1
lartomar2002
Junior Member
 
Join Date: Feb 2007
Location: florida
Posts: 8
Default no cold air

i turned on my ac today the blower works but no cold air. 2 months ago i install a new blower motor and replaced the motor and compressor capacitors. any advice?

this is my first post. larry

Last edited by lartomar2002; 02-26-2007 at 07:28 AM. Reason: used the word condenser for capacitor
lartomar2002 is offline   Reply With Quote
Old 02-25-2007, 05:49 PM   #2
glennjanie
Senior Member
 
Join Date: Mar 2006
Location: West Kentucky
Posts: 2,999
Send a message via AIM to glennjanie
Default

Hello Larry and Welcome to the Forum:
Go outside and see if anything is running in the outdoor unit. There should be a noisy motor sound from down inside it (that's the compressor) and a fan running at the top. If there is nothing going on there its time to check the breakers/fuses; there should be a local disconnect at the unit, make sure it is on and doesn't have blown fuses in it. The best way to check the cartridge fuses that are sometimes found there is to remove them and use an ohmmeter between the ends of each one.
Glenn
glennjanie is offline   Reply With Quote
Old 02-25-2007, 06:09 PM   #3
lartomar2002
Junior Member
 
Join Date: Feb 2007
Location: florida
Posts: 8
Default

thanks for the quick response. i will do that tomorrow becase it is night now.
lartomar2002 is offline   Reply With Quote
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Cold Air Return Question Richwho HVAC 12 01-14-2009 07:55 AM
do we need cold air return registers in every room sumat HVAC 3 01-12-2009 04:54 AM
AC not blowing cold air max937 HVAC 4 07-31-2008 09:59 AM
shower hot and cold problems chris1281982 Plumbing Forum 2 10-28-2007 08:04 AM
Moving a cold air return? WestBentley HVAC 7 03-02-2007 10:36 AM



New!
Plumbing Forum

Search Forums


Sponsors

All times are GMT -6. The time now is 04:09 PM.

Bike & Cycling Forums × Airsoft Forum × Tractor Forum × Home Brewing Forum × Firearms & Gun Forums × Homesteading and Survival Forum × Jeep Forum