DIY Home Improvement, Remodeling & Repair Forum > Appliances > HVAC > Pressure switch stuck open? 2 areas im looking @




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 10-19-2008, 04:17 PM  
1001miles
Junior Member
 
Join Date: Oct 2008
Posts: 3
Default Pressure switch stuck open? 2 areas im looking @

Hi, I've been searching for a few days & am unable to find what I'm looking for.

I have a 7 year old furnace. lennox ultra 5 advantage.

Went to turn on heat & nothing!!

The led trouble code is 3 blinks = "Pressure switch stuck open 30 seconds or longer after call for heat. on/off switch in "off" position during call for heat will generate this code ( this is right out of the furnace manual)

After researching I believe it is one of two items:

1. Draft inducer fan is bad.

2. Pressure switch is bad.


I cannot tell if the Draft inducer fan is actually spinning. I can hear the fan unit "hum" & it is very hot to the touch. However I am unsure if the fan is actually spinning!

I tested for continuity (w/ohms) from the black - green & white-green wires & found no continuity on both. There was continuity from black to white.

I am wondering how else I can test the fan to see if its working?



2. The tubes don't appear to be cloggeed, I blew in the one coming off the inducer fan & i can audibly hear the pressure switch clicking. Not sure how to test the switch with an meter.



Any thoughts / tips would be great. I'd like to try & figure this out without having to call in the repair man



Thanks



__________________
1001miles is offline  
 
Reply With Quote Quick reply to this message
Old 10-19-2008, 06:28 PM  
glennjanie
Senior Member
 
Join Date: Mar 2006
Posts: 2,990
Liked 2 Times on 2 Posts

Send a message via AIM to glennjanie
Default

Welcome 1001Miles:
We are happy to have you and hope we can be of help to you without costing the whole bank account.
Looks like your draft inducer fan motor is bad. You should be able to hear it running, especially if you put a screwdriver against the center of the motor and place your ear against the handle (its like a stethescope). The hum and the heat are my clues. If you have an ammeter you can check the amps on the power wire to the motor; if it is running it will show something like 2 or 3 amps, if its stuck it will show more like 6 amps. Its called 'locked rotor amperage'.
Also, if you have access to your exhaust pipe outside, it should blow a piece of toilet paper in your hand if the motor is running. The inducer motor is a high loss item on high efficiency furnaces.
Glenn



__________________
glennjanie is offline  
 
Reply With Quote Quick reply to this message
Old 10-20-2008, 09:41 AM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,170
Liked 101 Times on 89 Posts
Likes Given: 61

Default

break it down until you can get access to the inducer fan blades. nurse a little oil into the shaft bearings, spin it a bit by hand, reinstall and have warm and happy day.

__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Old 10-20-2008, 04:35 PM  
1001miles
Junior Member
 
Join Date: Oct 2008
Posts: 3
Default

Thanks for both ur responses.

So itested white & ground (both tests while the inducer was "humming") & had .6 & on the blakc & ground was 120v.

SO sounds like I have a bad draft inducer fan. Is this something that a cleaning will fix or do I need to buy a new fan? Any idea what price range on new fan is?

Thanks again!!!

__________________
1001miles is offline  
 
Reply With Quote Quick reply to this message
Old 10-20-2008, 05:55 PM  
1001miles
Junior Member
 
Join Date: Oct 2008
Posts: 3
Default

soooo never guess what I found when I took out my draft inducer?

2 dead birds were stuck in it & the pvc tube!!!

Everything now works like a charm -


Thanks for helping guys!!

__________________
1001miles is offline  
 
Reply With Quote Quick reply to this message
Old 10-20-2008, 07:43 PM  
Square Eye
Senior Member
 
Square Eye's Avatar
 
Join Date: Jan 2006
Posts: 1,273
Liked 4 Times on 4 Posts

Default

You might go to the local home center and find a strainer cover or a screen and cover that tube end to prevent that from happening again

__________________

[URL="http://www.houserepairtalk.com/announcement.php?f=39&a=6"][size=3]The Ten Commandments of House Repair Talk[/size][/URL]



[URL="http://home.bellsouth.net/p/s/community.dll?ep=16&groupid=289528&ck="]Square Eye's home page[/URL]

Square Eye is offline  
 
Reply With Quote Quick reply to this message
Old 11-02-2008, 11:03 AM  
falconphysics
Junior Member
 
Join Date: Nov 2008
Posts: 1
Default Same Problem (not the Dead Birds)

I have the same problem. "Pressure Switch Stuck Open"

When I jumper the switch everything seems to work fine. I have good flow of air at the input and output vents on the outside of the house. The draft inducer fan seems to be spinning.

I pulled the switch and blew through it to see if the switch was closing. It does, checked continuity of the switch and it seems to be fine.

As far as I can tell, I'm left with a couple of choices here. The pressure switch could not be switching at the proper pressure or something else is not working.

Any help would be greatly appreciated.



__________________
falconphysics is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Trane XE 90 pressure switch eddie HVAC 70 12-17-2013 05:14 PM
Resetting a Boshart Pressure Switch with NO lever, HELP? crapbathroom Plumbing Forum 0 12-31-2008 08:25 PM
Trane XE90 Pressure switch code. Truth? showngo2000 HVAC 7 10-13-2008 04:26 PM
Trane xe 90 led indicates pressure switch jskalic HVAC 1 11-29-2007 10:38 PM
Furnace draft pressure too low Alwaysfixinsumthin HVAC 1 10-26-2007 11:18 PM