DIY Home Improvement, Remodeling & Repair Forum > Appliances > HVAC > Tradewinds evap blower slipping on shaft




Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 07-29-2012, 09:31 AM  
Dutchman
Junior Member
 
Join Date: Jul 2012
Posts: 1
Default Tradewinds evap blower slipping on shaft

I have a Tradewinds TS571 evap cooler new Feb. 2011.

The thing has been banging whenever you turn it on this 2012 season. The unit was out of balance new from the factory to begin with, and it shakes. The squirrel cage doesn't turn in anywhere's near a perfect circle, it wobbles as though it is cocked-eyed.
Worked on it yesterday, got exasperated and quit after 2 1/2 hours. Went back up this morning. I have found that the actual blower wheel (squirrel cage) is slipping on the shaft. I have tried adjusting the set collars to grab hold of it to no avail. When it came new, the blower wheel seemed to be permanently attached to the shaft somehow.

Now, one end of the blower wheel (opposite the pulley side) actually jumps up then turns round like it's seated, then jumps up again, etc., etc. The blower wheel will not seat on the shaft. It seems to me, that if the blower wheel is supposed to be attached to the shaft, that it should be keyed in some way. So far, it looks as though I am going to have to take the whole assembly apart and bring it off the roof.

Any ideas as to the problem and how to fix it?



__________________
Dutchman is offline  
 
Reply With Quote Quick reply to this message
Old 07-29-2012, 03:44 PM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,181
Liked 104 Times on 91 Posts
Likes Given: 61

Default

check to see if the motor is mounted correctly.
almost sounds like you don't have the correct shaft size for squirrel cage.
Install new set screws and use loctite on the threads of the set screws.

__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Attic (skylight shaft and side wall) Shawner Insulation and Radiant Barriers 2 02-25-2012 02:18 PM
reflective material in skylight shaft? ilyaz Windows and Doors 7 03-03-2010 08:21 AM
Im tired of slipping when walking on my wet porch...HELP spec_j Flooring 6 10-20-2009 01:27 PM
Evap cooler is singing (loudly!) operaflute HVAC 2 08-19-2008 11:38 PM
Leaking evap coil merlinfolks HVAC 1 09-22-2006 05:39 AM