Newest Threads

brasilmom · 12-09-2009, 02:35 PM

Quote:

Originally Posted by brasilmom

I cannot get a very good pic of it due to the wiring. However, here is the info:

W2, COM 24V (red connected to it), W/W1, Y/Y2, R, G, HUM

Hope this helps. Thanks for your help. Be well

Miriam

Oh, and the humidifier was added on. We do not know if the furnace came with one, however it seems like there was one. Again, unknown if it was built in or added on.

Thanks. Be well

Miriam

**kok328** · 12-09-2009, 03:10 PM

Move the white wire off the HUM terminal and place it with the green wire on the G terminal.
This should energize the humidifier solenoid whenever the fan comes on (even when in A/C mode) so you might want to undo this change for A/C.
Let me know how it goes.

brasilmom · 12-09-2009, 04:13 PM

Thank you. It is working now. So, the G terminal is for the fan? What does G stand for?

Again, thanks for helping out with this small issue.

Be well

Miriam

**kok328** · 12-10-2009, 07:19 AM

Yes, G is for the fan, G stands for Green.
Your very welcome, glad to help.