DIY Home Improvement, Remodeling & Repair Forum

DIY Home Improvement, Remodeling & Repair Forum (
-   Electrical and Wiring (
-   -   1200 makita charger (

jonesrsrg 06-17-2009 10:43 PM

1200 makita charger
im having problems with a cordless makita drill battery charger and was wondering if anyone can help me. when i put a battery pack into the charger it doesnt start charging. ive checked the transformer it checks out ok. i checked out the start button , reset button , it seems like the reset button isnt working , is there a way to check all these out maybe im doing it wrong. this charger is for 12 volt batteries. any help at all would be greatly appreciated . dont wanna have to go spend money on a charger unless i have to

donmorgan 08-16-2009 08:13 PM

Ohm out the reset button to test it for continuity. You could try bypassing the reset with a careful. You take it to where you got it from and have them test it out. Just be sure to take your batteries with you. Also go to Makita's website and look for tech support. It might be under warranty. If you didn't break any seals.

kok328 08-17-2009 08:14 AM

It could be the chargers way of telling you the battery is no longer chargeable.

All times are GMT -6. The time now is 06:47 PM.